Owner's Manual

2. For optimum detection,position your unit with a clear,
unobstructed view of the road from the front and rear.
3. Do not allow the unit to make contact with the windshield.
This will eliminate unnecessary vibration.
4. Avoid placing your unit in direct sunlight.During the summer,
interior temperatures of an enclosed vehicle can sometimes
reach temperatures that will cause premature aging of the unit.
5. Your detector is not waterproof; exposure to water may cause
damage and your warrant will be void.
Dash Mounting
You can mount your unit to a level area of your vehicle’s dash
using the hook and loop fastener or the four,non-skid dash
mounting pads provided.
Windshield Bracket Assembly
The visor clip is fully
assembled.To assemble the
windshield bracket,follow this
diagram.
Windshield Mounting
1. Remove the mounting bracket
cover on top of the unit by
pressing on the raised dots
and pushing outward.Store
the cover in a safe place.
2. Clean the selected windshield area,position the suction-cup
mount on the windshield,and press firmly on each suction
cup to secure it in place.
3. Use a screwdriver or a small coin to adjust the angle of the
suction-cup mount until the base plate is level.

Windshield Bracket Assembly