Owner's Manual

7. Laser Optical Sensors: collect Laser signals from in front and
behind.
8. Audio Alert Speaker: all audible alerts are emitted from this
location.
9. Power Jack: using the straight or coiled cord,vector lr
operates in any vehicle with a 13.8 volt dc negative ground
system (10.5 volt to 16 volt range).
description of features
Power-Up Test Sequence/Start-up Mode
Each time your detector is turned on,vector lr will perform
a power-up test sequence based upon the Start-Up mode
selected.There are five Start-Up modes of operation plus a
Tutorial mode.Release the pwr button at your chosen selection.
Note—Pressing pwr at any time during Start-Up will bypass
the sequence.
NORMAL (Factory pre-set Mode)
Presents Audio and Text Messages for Laser,Ka,K,X and Safety
Warning System® (sws
™
).After this sequence,the status of
Selectable Features is displayed:
“
CTY X” or “CTYALL”;“X/K/KA BAND o n /o f f ”;
“ Automute o n /o ff”;“SWS o n ”,“SWS o f f ”;
“SCROLf a s t ”, SCROLslow”.Unit is now ready for
operation.
MODS (Modifications Mode)
Presents Audio and Text Messages for Laser,Ka,K,X,and
Safety Warning System® followed by the presentation of
Selectable Features as chosen by the user.
Q-START (Quick-Start Mode)
Unit will bypass any form of a power-up test sequence and
will display
CITY or HIGHWAY depending upon the mode
previously selected.Unit is ready for operation.
