Owner's Manual

TECH MODE
Presents Audio,Text Messages and frequency readout for
Laser,Ka,K,X,and Safety Warning System®.After this test
sequence,the status of Selectable Features is displayed.Tech
Mode gives you the benefit of identifying Radar bands and
Laser coupled with the actual frequency received. See sample
messages below:
LASER 900NM; KA 33.4; K 21.150; X 10.525
VOLTAGE METER MODE
Presents a continuous,digital readout of your vehicle’s battery
voltage (10.5 to 16 volt range).Voltage Meter Mode lets you
know if power to your unit falls below 10.5 volts and
consequently,impedes performance to your unit.While
operating in Voltage Meter Mode,your unit will display the
“C”or“H”confirming City or Highway mode,and will
provide full alerts to Radar,Laser and SWS
TM
when
encountered,while continuously monitoring your battery
voltage.If voltage rises above 16.0,the display will flash
“HI VOLT” until condition is rectified.If voltage falls below
10.5 volts,display will flash “LOW VOLT” until condition is
rectified.
TUTORIAL MODE
The tutorial mode allows you to become more familiar with
all audible and visual alerts.The message “TUTORIAL”
appears in the display followed by the audio and
corresponding Text Message for “LASER”,“Ka AUDIO”,
“K AUDIO”,“X AUDIO”,sample Radar alert (K band signal
ramping from weak to strong) and “SAFETY WARNING
SYSTEM SAMPLE ALERTS”.Three samplesws
™
messages are
then presented in the display along with the corresponding
Audio Alert:
Sample 1 “
ACCIDENT AHEAD”
Sample 2 “HIGHWAY WORKCREW AHEAD”
Sample 3 “POLICE IN PURSUIT”
While sample messages are playing you can access the
complete list of sws
™
messages by pressing the cty button to
