outlet speaker
Product Overview Thank you for purchasing the bēm wireless Outlet Speaker. Our speaker will bring you a new found freedom from wires while delivering an incredible sound. The Outlet Speaker is compatible with all devices enabled with Bluetooth© technology... which is currently a lot of devices! Product Interface Make sure to read through the following directions and perform the initial Bluetooth© syncing process. You should be up and running in no time. If you have any problems stop on by bemwireless.
Getting Started We know you’re excited to experience your new bēm wireless Outlet Speaker. These two easy steps will get you up and running quickly. Step 1: Plug It In Flip down the plug on the back of the speaker and connect your Outlet Speaker to a standard edison electrical outlet. Once the unit is plugged in press the power button to turn the speaker on and it will automatically go into Bluetooth© pairing mode.
Operation Details Power on / Power off Connection Press the power button to turn the Outlet Speaker on. The Bluetooth© indicator will light up to signify the unit is on and ready to be paired. Press the power button again to turn off the unit and the Bluetooth© indicator light will go out. Laptop / notebook / PC Please note, if the unit is not being used after 5 minutes the Outlet Speaker will automatically shut down to save battery power.
Troubleshooting Issue: Pairing is unsuccessfully after multiple attempts Solution: • • • • Check if the Bluetooth© indicator light is on. If the indicator light is off, please press the power button to turn the unit on. If the Bluetooth© indicator light still doesn’t come on after pressing the power button, please charge the unit. Check for other Bluetooth© devices around the surroundings that may interfere with searching and turn devices off.
More Info FCC STATEMENT For questions, comments or to purchase more bēm wireless products go to: bemwireless.com 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. You can also follow us at: facebook.com/bemwireless twitter.com/bemwirelessco youtube.com/bemwireless For information on your product's warranty go to: bemwireless.
Technical Parameters This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. bēm wireless http://bemwireless.com/ bēm wireless LLC. 1725 Kilkenny Ct. Woodstock, IL. USA Note: All specifications are subject to change without notice. Product Name: Outlet speaker Model: HL2018A Input: 100-240V~50/60HZ 0.5A Output: 1.
Safety Instructions Safety Instructions (cont.) This product is specially designed based on the full attention to safety; in order to make sure the accident-free operation, please abide the guidelines listed below: • • • • • • • • 14 Always position the unit on a stable and level surface.
