User Manual

23 Operation

Using the projector menus

The projector is equipped with On-Screen Display (OSD) menus for making various adjustments and

settings.

Below is the overview of the OSD menu.

To access the OSD menu, press MENU on the projector or remote control.

• Use the arrow keys ( / ) on the projector or remote control to move through the main menu items.

• Use the arrow keys ( / ) on the projector or remote control to move through the sub-menu items.

• Use the arrow keys ( / ) on the projector or remote control to adjust the settings or press OK on

the projector or remote control to enter the sub-menu.

• Press MENU twice* on the projector or remote control to leave and save the settings.

*The first press leads you back to the main menu and the second press closes the OSD menu.

Upgrading firmware

1. Go to BenQ Website and enter into Product page > Support >

Software to download the latest firmware file.

2. Unzip the download file, find and save the file named

"update_signed.zip" to the USB flash drive.

(Suggest to use the USB flash drive with FAT32 format)

3. Insert USB flash drive into USB 3.0 port.

4. Go to SYSTEM SETUP: ADVANCED > Firmware

Upgrade menu and press OK.

5. Select Yes to upgrade the firmware version. In the process of

upgrading, please keep power on until updating finished.

6. When you see this message, firmware upgrade is done.

The OSD screenshots below are for reference only, and may differ from the actual design.

Main menu

icon

Current input signal

Main menu Status

Sub-menu

Press BACK to go

to the previous page

or to exit.