User Manual

27 Menu operation
Menu operation
Please note that the on-screen display (OSD) menus vary according to the signal type selected and the
projector model you are using.
The menu items are available when the projector detects at least one valid signal. If there is no
equipment connected to the projector or no signal detected, limited menu items are accessible.
PICTURE menu
Picture Mode
The projector is preset with several predefined picture modes so that you can
choose one to suit your operating environment and input signal picture type.
• Bright: Maximizes the brightness of the projected image. This mode is suitable
for environments where extra-high brightness is required, such as using the
projector in well lit rooms.
• Living Room: With well-saturated color, fine-tuned sharpness and a higher
brightness level, Living Room mode is perfect for watching movies in a living
room where there is a small amount of ambient light.
• Sports: Complement with Sport Mode settings which is suitable for watching
sport events in a bright room with ambient light.
• Cinema: Complement with accurate color and deepest contrast at lower
brightness level, Cinema mode is suitable for playing movies in an environment
with a bit of ambient light, like in living room.
• User: Recalls the settings customized based on the current available picture
modes. See User Mode Management on page 28.
• Silence: Hidden as default. Shows only when Silence is switched on in the
DISPLAY menu.
• 3D: Is appropriate for playing 3D images and 3D video clips.
This mode is only available when 3D function is enabled.
• HLG: Delivers Hybrid Long Gamma effects by adding a logarithmic curve with
extra brightness over the top of the signal. This mode is only available when:
DISPLAY > HDR is set at Auto, and HLG content is detected.