User Manual

35 Menu operation
INFORMATION menu
Reset All
Settings
Returns all settings to the factory preset values.
The following settings will still remain: Picture Mode, User Mode Management, Brightness,
Contrast, Color, Tint, Sharpness, Advanced, Projector Position, Sound, Source Rename
and Password.
Firmware
Upgrade
Updates firmware version.
INFORMATI
ON
• Source: Shows the current signal source.
• Picture Mode: Shows the selected mode in the Picture menu.
• Resolution: Shows the native resolution of the input signal.
• Color System: Shows input system format.
• Color Gamut: When HDR10 is enabled, shows enabled Color Gamut. When
HLG is enabled, shows BT. 2020.
• Light Usage Time: Shows the number of hours the lamp has been used.
• 3D Format: Shows the current 3D mode.
• Firmware Version: Shows the firmware version of your projector.
• Service Code: Shows the serial number of your projector.