User Manual Wireless LAN Access Point AWL-500

BENQ Corporation
-5-
2-4 Hardware Installation
 Connect the Ethernet Cable
The 11Mbps Wireless LAN Access Point supports 10/100M Ethernet connection.
Attach your UTP Ethernet cable to the RJ-45 connector on the Access Point.
Then connect the other end of the RJ-45 cable to a hub or a station. Please be
sure to use the MDI port to connect the Access Point to a hub. Otherwise,
please use the MDI-X port to connect the Access Point to a computer/station.
 Plug the Power Cable
Plug the power adapter to the power socket on the Access Point, and plug the
other end of the power into an electrical outlet.
ONLY use the power adapter supplied with the Access Point.
Otherwise, the product may be damaged.
NOTE