User Manual
14
EN
LOAD CHECK
At various points in this manual, you will be requested to inspect the ejection
port, the loading gate, and the cartridge chamber of your Beretta semi-automatic
1301 Tactical to ensure that it is unloaded. This should become second nature
to you, as should the following precautions:
• Neverassumethatthegunisunloaded.
• Neverpointorpushtheguntowardyourselforanotherperson.
• Alwaysinspecttheejectionport,theloadinggateandthecartridgechamber
to make sure they are empty. The cartridge chamber is the portion of the
barrel into which the cartridge is inserted.
• Pullback the breech boltto lock it into the open position and engage the
safety before handing the shotgun to another person.
• Nevertakefromorgivetheshotguntoanotherpersonunlessthebreechbolt
has been opened and the ejection port, loading gate and cartridge chamber
have been inspected to ensure they are completely empty.
Inspect the ejection port, the loading gate and cartridge chamber as indicated
below:
CAUTION: Keep your finger off the trigger and keep the barrel pointed in a safe
direction.
• Check that the carrier stop push button is pressed all the way down.
Otherwise, push it down (Fig. 1).
• Usethecockinghandletoretractthebreechboltuntilitlocksintotheopen
position (Fig. 2).
• Engagethemanualsafetybypressingthesafetybuttontohidetheredring
(Fig. 3).
• Inspect the rearm by looking through the ejection port, the feeding gate
and the cartridge chamber. They must be empty. Check that there are no
cartridges in the magazine tube. If there are, unload the firearm as indicated
in“Howtounloadtheshotgun”.
• Pressthebreechboltreleasebuttonandgentlyguidethebreechbolttothe
locked position (Fig. 4).
• Disengagethesafety(Fig. 5) (red ring visible) and hold the breech bolt back 2
cm, pull the trigger, to decock the hammer.
CAUTION: When the safety button shows the red ring, the SAFETY IS
DISENGAGED, so the firearm is ready for use. When the red ring is not visible
on the safety button, the SAFETY IS ENGAGED.