User Manual

21
EN
the spring holder, to force the breech bolt out from the receiver (Fig. 15).
TRIGGER PLATE
NOTICE: The trigger plate only needs to be disassembled in order to clean the
trigger mechanism.
• Engagethesafety(thehammeriscocked)(Fig. 3).
• Pressthecarrierstoppushbutton,ifithasnotalreadybeenpressed(Fig. 1).
• Removethetriggerguardretainingpinbypressingwithapinpunchoranawl
(Fig. 16 and 17).
• Keepingthereleasebuttonpushedallthewaydown,removethetriggerplate
from the receiver using the trigger guard as a lever, first in the direction of the
barrel and then outward (Fig. 18 and 19).