Instructions / Assembly

BERG Buddy
10
EN
EN
2.2.4 Brakes
The go-kart is equipped with a special hub. With this hub it is possible while riding forwards to pedal
backwards so that the braking function in the rear wheel comes into action. While doing so, the brake
function is being operated. Besides that it is also possible to ride backwards.
2.3 Restrictions for use
• Always brake using the back pedal brake.
• Do not ride backwards at great speeds. Doing this could make you lose control.
• Collisions or other stunts increase the chance of injury to both the user and the product and are
not allowed.
• Avoid contact with moving parts while riding the product.
• Do not get on or off the product while it is moving
• Do not overload the product. Maximum user weight is 50 kg.
• Never ride in the dark without lights
• Only original BERG accessories may be used. BERG has a range of accessories with which you can
adapt the go-kart entirely to your own wishes. You can find all the accessories at www .bergtoys.
com.
3. Maintenance
Some maintenance is necessary in order to use the BERG product and have fun with it for a long time.
This chapter describes how, how often, and which maintenance must be carried out.
3.1 Maintenance scheme
Daily Monthly Half yearly Yearly
Wheels / res Frame Driving mechanism Plasc parts
Check for wear. Clean and check all nuts
and bolts
Check for correct
funconing of bearings,
chain, hub, sprockets and
axles
Clean the plasc parts and
check damage
Check the frame for any
cracks and fractures
Check the re pressure
and if necessary increase
the pressure.
Driving mechanism
Check chain for correct
tension
Chain greasing
Steering
Check all nuts and bolts
Lubricate the moving
parts
Clean and oil the chains
3.2 Maintenance activities
3.2.1 Frame
The frame is powder-coated or black zinc plated. To prevent any rust forming it is important
to regularly clean the frame. If you want to conserve the frame with grease, only use acid free
substances. You can treat damaged areas with paint.