Operation Manual

General Description
BergHOFF pressure cookers have been designed to satisfy the most demanding
requirements. The body and the lid are made of 18/10 stainless steel and the heat
distributing base is of the sandwich type.
Components
 Cooker body
 Cooker lid
 Lower long handle
 Upper long handle
 Side handle
 Operating (pressure) valve
 Switch (opening and closing)
 Rubber ring (FIG.009)
 Safety valve
 6-layer sandwich base
 Safety lock
Troubleshooting
If you notice that the pressure valve does not rise, it is possible that one of the
following has happened:
 The switch is not in the closed position.
 There is not enough liquid inside the pressure cooker.
 The rubber ring is dirty or damaged.
 The temperature of the cooker is too low.
If you notice that team escapes from the rim of the cover it is possible that one of
the following has occurred:
 The pressure cooker is not correctly closed.
 The rubber ring is not correctly placed or is damaged.
Do not attempt to modify any of the parts. Do not attempt to assemble them in
any way other that indicated. Only use the manufacturer’s spare parts (available at
your dealer).
Do not disassemble upper handle, side handle, or the safety valve as these parts
contain their structural components.