Instruction manual

12 General operating instructions
Start
· found in layout 1
· touch symbol
· the embroidery hoop is brought
into the start position, the needle is
positioned exactly over the starting
point of the motif
Motif center
· found in layout 1
· touch symbol
· the center of the motif is displayed
· the embroidery hoop is moved so
that the needle is positioned exactly
in the center of the motif
Check size
Double function
1st function
· checks the maximum hoop position
· the motif is read
2nd function
· keep symbol depressed and the
reference position is read as well
Rescale Motif
· found in layout 1
· touch the left field to reduce the
motif
· touch the right field to enlarge the
motif
· the changes are displayed in
percent in the center field
· touch the center field to return the
motif to its original (100%) size
Show
· found in layout 1 and 2
· after reducing or enlarging a motif,
the new motif size is displayed on
the screen
· touch symbol
· the altered motif appears in its
revised form
· the hourglass appears next to the
show symbol during this operation
Hourglass
· the hourglass symbol indicates an
altered or displaced motif is being
recalculated
· the calculation time is approxi-
mately 1–10 minutes depending on
the motif
· no operations are possible on the
sewing computer when the hour-
glass is blinking!
Mirror image (right/left)
· found in layout 1
· touch symbol
· the sewing computer sews the
motif mirror imaged right to left
· the marked corner of the motif
changes from right to left
Rotate motif
· found in layout 1
· touch the left symbol
· the motif will be rotated
5° clockwise
· touch the right symbol
· the motif will be rotated
5° counter-clockwise
· the degree (°) of rotation is shown
in the right symbol
· motifs can be rotated into 72
different positions
·the motif turns on the screen
· the lower right corner of the motif
is always marked, indicating the
orientation of the design
OK
· touch symbol
· confirms all previous selections
· switches to normal screen with
embroidery color sequence
· the motif is now calculated as the
hourglass blinks
•
if the indicated square is partially
shifted outside the hoop, the motif is
being recalculated to determine if it
will fit within the parameters of the
hoop in order to be successfully
embroidered.
•
if one or more stitches are outside
the hoop, a message appears
•
this recalculation is also done after
touching the ok symbol provided that
the check function was not activated
before
Check motif position in oval hoop parameters
185_SM_engl 19.04.2004 9:18 Uhr Seite 12
030867.51.04_EMB_0401_a185_EN