Instruction manual

37Thread breakage during embroidery
Thread breakage during embroidery
Sometimes the upper thread can
either break or run out while you are
embroidering. If this happens, the
sewing computer stops automatically.
If the lower thread breaks or runs
out, only artista 180/185 stops auto-
matically. Artista 165/170 doesn’t
feature a lower thread control, and
so doesn’t stop automatically when
the lower thread breaks or runs out.
Activate upper and lower thread
control using the Setup program
(see the sewing computer instruction
manual).
Upper thread breaks
· the Bernina artista (165/170 or
180/185) stops if the upper thread
breaks or runs out
· an error message appears on the
screen
· check the thread and re-thread if
necessary
· touch “esc” to return to the sewing
screen
Lower thread runs out
· only artista 180/185 stops automa-
tically if the lower thread runs out
(1–6 m remaining thread of average
thickness; up to 15 m with a fine
thread)
· a message appears on the screen
· check the lower thread, refill spool
· touch “esc” to return to the sewing
screen
·artista 165/170 doesn’t stop auto-
matically
Stitch sequence control when thread
breaks
· touch the stitch control symbol in
the sewing screen
· the screen changes
Stitch sequence control
(when thread breaks)
To check:
· touch the right or left arrow
(right = forward, left = reverse)
· the embroidery hoop is moved
through the stitch sequence
· touch continuously to run through
the sequence quickly
When thread breaks:
· touch the left arrow once
· the needle moves back one step
at a time
· touch continuously to move the
needle more quickly
Beginning embroidery again
· set the needle sufficiently far back
for the embroidery to start a few
stitches before the break
· touch “ok”
· the sewing screen appears
· lower the presser foot
· start sewing by pressing the foot
control or the securing button on
the head frame
· after the first few stitches, the
sewing computer stops
· cut the thread ends
· complete the motif
185_SM_engl 19.04.2004 9:18 Uhr Seite 37
030867.51.04_EMB_0401_a185_EN