s001-6_e.qxd 19.4.2004 16:07 Uhr Seite 1 IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should always be followed, including the following: Read all instructions before using this sewing computer. When the sewing computer is not in use, it should be disconnected from the electricity supply by removing the plug from the outlet. 3.
s001-6_e.qxd 19.4.2004 16:07 Uhr Seite 2 13. Do not operate where aerosol (spray) products are being used or where oxygen is being administered. 14. To disconnect, turn all controls to the off («0») position then remove the plug from the outlet. 15. Do not unplug by pulling on the cord but grasp the plug before pulling. 16. No responsibility will be taken for any possible damage as the result of misuse of the sewing computer. 17. This sewing computer is provided with double insulation.
s001-6_e.qxd 19.4.2004 16:07 Uhr Seite 3 artista 200 Dear artista customer Congratulations! With the purchase of the artista 200, you have acquired the ultimate sewing and embroidery system available in today’s market. By purchasing this system, you established that you are a creative person who is looking for the opportunity to expand the limits of creativity.
s001-6_e.qxd 19.4.2004 16:07 Uhr Seite 4 Masthead artista 200 Sewing and Embroidery Computer Instruction Manual Text / Sewing and Embroidery projects Susanne Festi, Franziska Kiener, Herbert Stolz, Anna Tiberini Photography Ben Wiesenfarth, Konstanz: S.
s001-6_e.qxd 19.4.
s001-6_e.qxd 19.4.2004 16:07 Uhr Seite 6 6 030794.71.
Inhalt Nähen_e 19.4.2004 16:06 Uhr Seite Z1 Sewing – Content The Sewing Computer 7–34 Practical Stitches 35–72 Decorative Stitches 73–96 Lettering 97–108 Buttonholes 109–134 Quilt Stitches 135–148 Personal Program 149–152 Saving and Deleting Stitches and Stitch Combinations 153–158 Setup Program 159–170 Sewing and Sewing Computer Support 171–182 Connecting Peripherals 183–186 030794.71.
s007-34_e.qxd 19.4.2004 16:08 Uhr Seite 7 Setting up the Sewing Computer 8 Operating Instructions 11 Screen Display 23 External Functions 28 On-screen Functions 29 The Sewing Computer 030794.71.
s007-34_e.qxd 19.4.2004 16:08 Uhr Seite 8 Details of the Sewing Computer 13 18 20 19 21 12 22 11 23 27 24 10 25 26 28 17 16 15 7 9 29 14 30 31 32 33 6 8 34 5 3 2 4 1 35 Front view Setting up the Sewing Computer 36 37 38 39 Back view 8 The Sewing Computer – Setting up the Sewing Computer 030794.71.
s007-34_e.qxd 19.4.
s007-34_e.qxd 19.4.
s007-34_e.qxd 19.4.2004 16:09 Uhr Seite 11 Setting up the Sewing Computer Foot Control Power Cable B C A A C B Power Cable plug A into sewing computer plug B into electrical outlet Foot Control Cable plug C into sewing computer (look for symbol) Important! (USA/Canada only) Use only foot controller type LV1 for sewing computer model artista 200.
s007-34_e.qxd 19.4.
s007-34_e.qxd 19.4.
s007-34_e.qxd 19.4.
s007-34_e.qxd 19.4.
s007-34_e.qxd 19.4.2004 16:09 Uhr Seite 16 Supplementary Spool Pin (vertical) Vertical Spool Pin • the supplementary spool pin (vertical) is stored in the accessory box insert the pin from right to left in the opening to remove, pull to the right at the base of the spool pin • essential sewing aid when using more than one thread, i.e. double needle, etc. Threading the Double Needle 1.
s007-34_e.qxd 19.4.2004 16:09 Uhr Seite 17 Stitch Plate 5.
s007-34_e.qxd 19.4.2004 16:09 Uhr Seite 18 Needle/Thread Combination In order to check the needle/thread compatibility, the correct size thread must correspond with the correct size needle. Correct Needle/Thread Combination When sewing, the thread should travel smoothly down the long groove on the front of the needle. The thread can be secured optimally. Too Thin Thread or Too Thick Needle The thread does not travel smoothly in the groove. Faulty stitches and damage of the thread can occur.
s007-34_e.qxd 19.4.2004 16:09 Uhr Seite 19 Many materials are easier to sew if the appropriate needle is used.
s007-34_e.qxd 19.4.2004 16:09 Uhr Seite 20 Presser Feet Note: The letter «C» after a foot number indicates the foot is coded or equipped with a sensor for 9mm stitching. When a stitch is selected with a coded foot attached to the sewing computer, the preprogrammed width is 9mm, rather than 5.5mm. This letter does not always appear on the foot and in some cases does not appear on the screen in the presser foot indicator.
s007-34_e.qxd 19.4.2004 16:09 Uhr Seite 21 Changing the Presser Foot ! Refer to the safety instructions! Changing the Presser Foot raise the needle and presser foot turn power switch to «0» (off) Raising the Lever raise the clamping lever remove the presser foot Attaching the Presser Foot guide the foot upwards over the cone press the clamping lever down Presser Foot Pressure Dial on Head Frame The presser foot pressure can be set on the left of the head frame.
s007-34_e.qxd 19.4.2004 16:09 Uhr Seite 22 Feed Dog and Fabric Feed Feed Dog and Stitch Length With each stitch the feed dog moves forward by one step. The length of this step is determined by the stitch length selected. With an extremely short stitch length, the steps are short. The fabric moves under the foot quite slowly, even at full sewing speed, buttonholes or satin stitch.
s007-34_e.qxd 19.4.
s007-34_e.qxd 19.4.
s007-34_e.qxd 19.4.
s007-34_e.qxd 19.4.
s007-34_e.qxd 19.4.
s007-34_e.qxd 19.4.2004 16:09 Uhr Seite 28 External Function Buttons Altering Needle Position press the left or right Needle Position button • the needle moves to the right or left as selected keep button pressed to quickly change needle positions • total of 11 needle positions: 5 left, 5 right, and 1 center Tutorial press the Tutorial button • brief operating instructions, advice on fabric, needle or techniques, etc.
s007-34_e.qxd 19.4.2004 16:09 Uhr Seite 29 General Functions The following functions are found on various screens and programs of the artista 200 sewing computer. They are consistently used in the same manner for specific tasks when accessing and moving between different programs.
s007-34_e.qxd 19.4.2004 16:09 Uhr Seite 30 Special Functions The following functions are found on the artista 200 sewing computer. Each function which can be used in the selected program is either shown in the yellow part of the screen or on the two bottom rows of the gray part of the screen.
s007-34_e.qxd 19.4.2004 16:09 Uhr Seite 31 Stitch Counter touch symbol when the desired length is reached (e.g.
s007-34_e.qxd 19.4.
s007-34_e.qxd 19.4.
s007-34_e.qxd 19.4.2004 16:09 Uhr Seite 34 Thread Tension Basic tension settings apply automatically when a stitch or program is selected. The tension is factory set for best possible sewing results using a 100 weight, 2 ply polyester thread (100/2). The tension may vary when using other types of thread such as embroidery thread, and it may be necessary to adjust tension to suit the fabric and stitch type.
s035-72_e 19.4.2004 16:12 Uhr Seite 35 Summary Practical Stitches 36 In General 38 Temporary Altered Stitch Memory 39 Long Stitch Function 40 Straight Stitches 41 • Straight stitch No. 1 • Securing stitch No.5 • Edgestitching • Zippers • Triple straight stitch • Basting stitch Zig-zag Stitch 50 • Zig-zag No. 2 • Zig-zag seam • Triple Zig-zag Blind Hem 52 Sewing Knit Fabrics 53 • Notes and tips for sewing knit fabrics • Honeycomb stitch No. 8 • Vari-overlock No. 3 • Double overlock No.
s035-72_e 19.4.2004 16:12 Uhr Seite 36 Summary Stitches Summary Application of Practical Stitches Straight stitch All non-stretch fabrics. All straight stitch work Triple straight stitch Reinforced seams in firm, heavy fabrics, topstitching and visible seams Zig-zag Most fabric types.
s035-72_e 19.4.2004 16:12 Uhr Seite 37 Super stretch Open seam in all super-stretch fabrics, such as Lycra Gathering stitch Most types of fabric. Gathering with shirring elastic. Butted seams (edge to edge) and decorative stitching Stretch overlock Mediumweight knits, toweling and firm wovens. Overlock seams, flat joining seams Jersey stitch Natural, blended or synthetic fabrics and delicate knits. Visible seams and hems.
s035-72_e 19.4.2004 16:12 Uhr Seite 38 In General Adjusting Individual Practical Stitches Depending on the fabric and application an alteration of the basic settings may be necessary.
s035-72_e 19.4.2004 16:12 Uhr Seite 39 Temporary Altered Stitch Memory Stitch: any selected stitch Temporary Altered Stitch Memory • stitch length, stitch width, needle position, etc.
s035-72_e 19.4.2004 16:12 Uhr Seite 40 Long Stitch Function Long Stitch Function • the sewing computer sews every second stitch (the longest stitch possible is 10mm when the stitch length is set at 5mm) • works with the practical and decorative stitches • for all work where a longer stitch is required • additional alteration of stitches possible Sewing With the Long Stitch Function select desired practical or decorative stitch select Long Stitch function.
s035-72_e 19.4.2004 16:12 Uhr Seite 41 Straight Stitch Stitch: Needle: Thread: Feed dog: Presser foot: Straight stitch No. 1 size and type suitable for the fabric selected cotton or polyester up (sewing position) Reverse pattern foot No.
s035-72_e 19.4.2004 16:12 Uhr Seite 42 Securing Stitch Stitch: Needle: Thread: Feed dog: Presser foot: Securing stitch No. 5 (straight stitch) size and type suitable for the fabric selected cotton or polyester up (sewing position) Reverse pattern foot No.
s035-72_e 19.4.2004 16:12 Uhr Seite 43 Edgestitching Stitch: Needle: Thread: Feed dog: Presser foot: Straight stitch No. 1 size and type suitable for the fabric selected cotton, polyester, cordonnet (topstitching) up (sewing position) Reverse pattern foot No. 1C, Blindstitch foot No. 5 or Edgestitch foot No. 10 (optional accessory) Narrow Edgestitching Needle Position • left for outer edge • right for inner edge (hem edges) Presser Foot • Blindstitch foot No.
s035-72_e 19.4.2004 16:12 Uhr Seite 44 Wide Edgestitching Needle Position • any needle position can be used according to the width of the stitching • different needle positions will place the stitching at various distances from the edge of the fabric Presser Foot • Reverse pattern foot No.
s035-72_e 19.4.2004 16:12 Uhr Seite 45 Zippers Stitch: Needle: Thread: Feed dog: Presser foot: Needle position: Straight stitch No. 1 size and type suitable for the type of fabric selected cotton or polyester up (sewing position) Zipper foot No.
s035-72_e 19.4.2004 16:12 Uhr Seite 46 Invisible Zipper Stitch: Needle: Thread: Feed dog: Presser foot: Zipper length: Straight stitch No. 1 middle cotton or polyester up (sewing position) Invisible zipper foot No. 35 (optional accessory) and Open embroidery foot No. 20C opening plus 1 1/2” (4cm) allowance Invisible Zipper • special zippers are used.
s035-72_e 19.4.2004 16:12 Uhr Seite 47 Sewing Second Half of the Zipper close zipper and pin the second half on top of the inside open zipper again, pin the entire length and baste sew from top to bottom – the zipper coils are now positioned in the other groove close zipper Closing Seam attach Open embroidery foot No. 20C (improves overview) pin and baste seam sew seam from top to inserted zipper, staying as close as possible to the zipper if a small opening results, use Zipper foot No.
s035-72_e 19.4.2004 16:12 Uhr Seite 48 Triple Straight Stitch Seam Stitch: Needle: Thread: Feed dog: Presser foot: Triple straight stitch No. 6 Jeans or 80-90 universal cotton or polyester up (sewing position) Reverse pattern foot No. 1C or Jeans foot No. 8 Open Seam • durable seam for firm and densely woven fabrics such as denim and corduroy • reinforced seam for garment areas subject to hard wear TIP For heavy layers or very densely woven fabrics: A Jeans needle or Jeans foot No.
s035-72_e 19.4.2004 16:12 Uhr Seite 49 Basting Stitch Stitch: Needle: Thread: Stitch length: Feed dog: Presser foot: Basting stitch No. 21 size and type suitable for the fabric selected cotton or polyester 3.5 - 5mm up (sewing position) Reverse pattern foot No. 1C Basting Stitch • straight stitch, sewing every fourth stitch (i.e.
s035-72_e 19.4.2004 16:12 Uhr Seite 50 Zig-zag Stitch Stitch: Needle: Thread: Feed dog: Presser foot: Zig-zag stitch No. 2 size and type suitable for the fabric selected cotton or polyester up (sewing position) Reverse pattern foot No.
s035-72_e 19.4.2004 16:12 Uhr Seite 51 Visible Hem With Triple Zig-zag Stitch Stitch: Stitch width: Stitch length: Needle: Thread: Feed dog: Presser foot: Triple Zig-zag stitch No. 7 2.5 – 9mm depending on fabric basic setting universal or Jeans cotton or polyester up (sewing position) Reverse pattern foot No.
s035-72_e 19.4.2004 16:12 Uhr Seite 52 Blind Hem Stitch: Needle: Thread: Feed dog: Presser foot: Blindstitch wide No. 9, Blindstitch narrow No. 29 size and type suitable for the fabric selected cotton, polyester, or silk up (sewing position) Blindstitch foot No. 5 Blind Hem Wide No. 9 • for invisible hems in medium to heavy fabrics Blind Hem Narrow No.
s035-72_e 19.4.
s035-72_e 19.4.2004 16:12 Uhr Seite 54 Honeycomb Stitch Edges Stitch: Needle: Thread: Feed dog: Presser foot: Honeycomb stitch No. 8 universal, ballpoint, or stretch cotton or polyester up (sewing position) Reverse pattern foot No.
s035-72_e 19.4.2004 16:12 Uhr Seite 55 Overlock Seams Vari-overlock Seam Stitch: Needle: Thread: Feed dog: Presser foot: Vari-overlock No. 3 size and type suitable for the fabric selected cotton or polyester up (sewing position) Overlock foot No.
s035-72_e 19.4.2004 16:12 Uhr Seite 56 Stretch Overlock Seam/Reinforced Overlock Seam Stitch: Needle: Thread: Feed dog: Presser foot: Stretch overlock No. 13 or Reinforced overlock No. 19 universal, ballpoint or stretch cotton or polyester up (sewing position) Reverse pattern foot No. 1C or Overlock foot No.
s035-72_e 19.4.2004 16:12 Uhr Seite 57 Flat Joining Seam Stitch: Needle: Thraed: Feed dog: Presser foot: Stretch overlock No. 13 universal, ballpoint or stretch cotton or polyester up (sewing position) Reverse pattern foot No.
s035-72_e 19.4.2004 16:12 Uhr Seite 58 Hems With Practical Stitches Visible Hem With Jersey Stitch Stitch: Needle: Thread: Feed dog: Presser foot: Jersey stitch No. 14 universal, ballpoint or stretch cotton or polyester up (sewing position) Reverse pattern foot No.
s035-72_e 19.4.2004 16:12 Uhr Seite 59 Ribbing With Overlock Seams Stitch: Needle: Thread: Feed dog: Presser foot: Vari-overlock No. 3 size and type suitable for the fabric selected cotton or polyester up (sewing position) Overlock foot No.
s035-72_e 19.4.2004 16:12 Uhr Seite 60 Hems With Double Needle Stitch: Needle: Thread: Feed dog: Presser foot: Straight stitch No. 1 double needle cotton or polyester up (sewing position) Reverse pattern foot No.
s035-72_e 19.4.2004 16:12 Uhr Seite 61 Ribbing Finish Ribbing • • decorative and very practical way of finishing the edges suitable for sweatshirts, pajamas – either way, etc.
s035-72_e 19.4.2004 16:12 Uhr Seite 62 Reinforced Edges on Woven Fabrics Stitch: Needle: Thread: Feed dog: Presser foot: Honeycomb stitch No. 8 or Running stitch No. 4 size and type suitable for the fabric selected lightweight darning thread up (sewing position) Reverse pattern foot No. 1C Reinforced Edges • good for work clothes, table linen, towels, etc. • use a cord to match the color of the fabric.
s035-72_e 19.4.2004 16:12 Uhr Seite 63 Sewing on Elastic, Shirring Elastic/Cord Gathering Stitch: Needle: Thread: Feed dog: Presser foot: Gathering stitch No. 12 size and type to suit the fabric selected cotton or polyester up (sewing position) Buttonhole foot No. 3C Shirring Elastic/Cord • for gathering lengths of fabric, for finishing children’s and doll clothing, crafts, etc.
s035-72_e 19.4.2004 16:12 Uhr Seite 64 Sewing on Elastic, Shirring Elastic/Cord Sewing on Narrow Elastic With Universal Stitch Stitch: Stitch width: Needle: Thread: Feed dog: Presser foot: Universal stitch No. 15 depends on width of elastic type and size to suit the fabric selected cotton or polyester up (sewing position) Reverse pattern foot No. 1C or Embroidery foot No.
s035-72_e 19.4.2004 16:12 Uhr Seite 65 Sewing on Elastic, Shirring Elastic/Cord Sewing on Wide Elastic Stitch: Stitch length: Needle: Thread: Feed dog: Presser foot: Needle stop: Running stitch No. 4 or Sewn-out zig-zag No. 16 or Lycra stitch No. 17 adjust to suit elastic size and type to suit the fabric selected cotton or polyester up (sewing position) Reverse pattern foot No.
s035-72_e 19.4.2004 16:12 Uhr Seite 66 Sewing on Elastic, Shirring Elastic/Cord Elastic Edges Stitch: Stitch width: Stitch length: Needle: Thread: Feed dog: Presser foot: Zig-zag stitch No. 2 approximately 5mm 1–1.5mm size and type suitable for the fabric selected cotton or polyester up (sewing position) Reverse pattern foot No.
s035-72_e 19.4.2004 16:12 Uhr Seite 67 Automatic Darning Quick Darning of Holes or Worn Areas Stitch: Needle: Thread: Feed dog: Presser foot: Simple darning program No. 22, Reinforced darning program No. 23 size and type suitable for the fabric selected lightweight darning thread up (sewing position) Automatic buttonhole foot No. 3A, Reverse pattern foot No. 1C (only for Darning program No. 22) Simple Darning Program No.
s035-72_e 19.4.2004 16:12 Uhr Seite 68 Manual Darning Stitch: Neddle: Thread: Feed dog: Presser foot: Straight stitch No. 1 size and type suitable for the fabric selected lightweight darning thread down (darning position) Darning foot No.
s035-72_e 19.4.2004 16:12 Uhr Seite 69 Patching Knits and Jersey Stitch: Needle: Thread: Feed dog: Presser foot: Jersey stitch No. 14 size and type suitable for the fabric selected lightweight darning thread up (sewing position) Reverse pattern foot No.
s035-72_e 19.4.2004 16:12 Uhr Seite 70 Freehand Embroidery Stitch: Needle: Thread: Feed dog: Presser foot: Straight stitch No. 1 or Zig-zag stitch No. 2 size and type suitable for the fabric selected embroidery thread, lightweight thread in bobbin down (darning position) Darning foot No. 9 (optional accessory) or Freehand embroidery foot No. 24 (optional accessory) Freehand Embroidery • freehand embroidery is used for creative designing. With the Straight stitch No. 1 or Zig-zag stitch No.
s035-72_e 19.4.2004 16:12 Uhr Seite 71 Bartack Program Stitch: Needle: Thread: Feed dog: Presser foot: Bartack program No. 24 or No. 25 size and type to suit the fabric selected cotton or polyester up (sewing position) Reverse pattern foot No.
s035-72_e 19.4.2004 16:12 Uhr Seite 72 Fly Stitches Stitch: Needle: Thread: Feed dog: Presser foot: Fly stitch No. 26 and No. 27 size and type to suit the fabric selected cotton, decorative or polyester up (sewing position) Reverse pattern foot No. 1C or Sideways motion foot No. 40C Fly Stitches The fly stitch is used as reinforcement at the end of seams, e.g. pocket edges or slits • stitch No. 26 is for mediumweight to thick fabric • stitch No.
s073-96_e 19.4.
s073-96_e 19.4.2004 16:21 Uhr Seite 74 Decorative Stitches 9mm, 40mm, 16 Directional Sewing and 4 Directional Sewing Decorative Stitches, 16 and 4 sewing directions press Decorative Stitch button, 16/4 directions Summary Summary • The following list of categories appears: Category Category Category Category Category Category Category Category Category Category Category Category Category • 74 101...
s073-96_e 19.4.
s073-96_e 19.4.2004 16:21 Uhr Seite 76 Decorative Stitches 9mm Stitch: Needle: Thread: Feed dog: Presser foot: Decorative stitches 9mm size and type suitable for the fabric selected cotton, decorative up (sewing position) Reverse pattern foot No. 1C, Open embroidery foot No.
s073-96_e 19.4.2004 16:21 Uhr Seite 77 Combining Decorative Stitches and Functions Stitch: Needle: Thread: Feed dog: Presser foot: Decorative stitches 9mm size and type suitable for the fabric selected cotton, decorative up (sewing position) Reverse pattern foot No. 1C or Open embroidery foot No. 20C Create amazing effects by combining decorative stitches and functions.
s073-96_e 19.4.2004 16:21 Uhr Seite 78 Altering Decorative Stitches With Long Stitch Function (1) press the Long Stitch function • the sewing computer will sew every alternate stitch • the completely changed stitch will be displayed on the screen Stretching Decorative Stitches With Pattern Extend Function (2) touch the Pattern Extend function once or more • the selected stitch is extended (i.e.
s073-96_e 19.4.2004 16:21 Uhr Seite 79 Practical and Decorative Stitches in the Combi Mode Stitch: Needle: Thread: Feed dog: Presser foot: Decorative and Practical stitches 9mm size and type suitable for the fabric selected cotton, decorative up (sewing position) Reverse pattern foot No. 1C or Open embroidery foot No.
s073-96_e 19.4.2004 16:21 Uhr Seite 80 Example of a Stitch and Function Combination touch stitch No. 656 once touch stitch No.
s073-96_e 19.4.2004 16:21 Uhr Seite 81 Cross Stitches Stitch: Needle: Thread: Feed dog: Presser foot: Cross stitches No. 301 - 314 size and type suitable for the fabric cotton, decorative up (sewing position) Reverse pattern foot No. 1C or Open embroidery foot No.
s073-96_e 19.4.
s073-96_e 19.4.2004 16:21 Uhr Seite 83 Heirloom Techniques / Hemstitching Stitch: Needle: Thread: Feed dog: Presser foot: Hemstitch Nos. 701, 702, 709 - 711, 713, 720, 721, 723, 725, 726, 732, 742 Wing needle, Double wing needle cotton or decorative up (sewing position) Reverse pattern foot No. 1C or Open Embroidery foot No.
s073-96_e 19.4.2004 16:21 Uhr Seite 84 Heirloom Techniques / Pintucks Stitch: Needle: Thread: Feed dog: Presser foot Straight stitch No. 1 Double needle 1-4mm, depending on the Pintuck presser foot used and the fabric cotton or decorative up (sewing position) Pintuck feet No. 30 (3 grooves), No. 31 (5 grooves), No. 32 (7 grooves), or No.
s073-96_e 19.4.
s073-96_e 19.4.2004 16:21 Uhr Seite 86 Stitching Corners • with a double needle the fabric cannot simply be pivoted at corners.
s073-96_e 19.4.2004 16:21 Uhr Seite 87 Heirloom Techniques / Scallops Off the Edge Stitch: Needle: Thread: Feed dog: Presser foot: Padded satin stitch No. 416 size and type suitable for the fabric selected cotton or decorative up (sewing position) Open embroidery foot No. 20C or Embroidery foot No. 6 (special accessory) Padded Satin Scallops • an «airy» finish for any finished edge • for garments, table and bed linens Preparation to create padded satin scallops «in the air», i.e.
s073-96_e 19.4.2004 16:21 Uhr Seite 88 Heirloom Techniques / Corded Scallops Stitch: Needle: Thread: Feed dog: Presser foot: Satin scallop stitch No. 507, 508 size and type suitable for the fabric selected cotton or decorative up (sewing position) Sideways motion foot No. 40C, and Open Embroidery foot No. 20C, or Embroidery foot No.
s073-96_e 19.4.2004 16:21 Uhr Seite 89 Sideways Motion Stitches In General Sideways Motion Stitches • sideways motion stitches are large stitches which are sewn with the fabric being fed sideways, as well as forwards and backwards touch desired stitch to activate it • sideways motion stitches are depicted with 4 arrows in the Stitch Altering Area • start (green point) and end (read cross) are visible in the Stitch Altering Area • • with some individual stitches (e.g. Single motif No.
s073-96_e 19.4.
s073-96_e 19.4.2004 16:22 Uhr Seite 91 Sideways Motion Stitches Combining Manually With Templates Stitch: Needle: Thread: Feed dog: Presser foot: Sideways motion stitches size and type suitable for the fabric selected cotton or decorative up (sewing position) Sideways motion foot No.
s073-96_e 19.4.2004 16:22 Uhr Seite 92 Sideways Motion Stitches Automatic Connection With 16 Directional Sewing Stitch: Needle: Thread: Feed dog: Presser foot: Sideways motion stitches size and type suitable for the fabric selected decorative up (sewing position) Sideways motion foot No.
s073-96_e 19.4.
s073-96_e 19.4.2004 16:22 Uhr Seite 94 16 Directional Sewing Stitch: Needle: Thread: Feed dog: Presser foot: Straight stitch No. 39 / Zig-zag stitch No. 40 size and type suitable for the fabric selected cotton or decorative up (sewing position) Sideways motion foot No.
s073-96_e 19.4.2004 16:22 Uhr Seite 95 Connecting Stitches Stitch: Needle: Thread: Feed dog: Presser foot: Straight stitch No. 39 size and type suitable for the fabric selected cotton or decorative up (sewing position) Sideways motion foot No.
s073-96_e 19.4.2004 16:22 Uhr Seite 96 4 Directional Sewing Stitch Nos. 41 - 48 size and type suitable for the fabric selected cotton or decorative up (sewing position) Sideways motion foot No. 40C Stitch: Needle: Thread: Feed dog: Presser foot: 4 Sewing directions • 4 directional automatic sewing without turning fabric • sewing decorative squares • appliquéing squares • sewing patches on garments, especially on pants legs, sleeves, etc.
s097-108_e 19.4.2004 16:22 Uhr Seite 97 Alphabet Summary 98 Important Lettering Information 99 Combining Lettering (9mm) 100 General Monogramming Information (Sideways Motion) 103 Monogram Size 1 104 Monogram Sizes 2 and 3 107 Lettering 030794.71.
s097-108_e 19.4.2004 16:22 Uhr Seite 98 Alphabet Summary Alphabets press Alphabet button Summary Alphabet Summary • Alphabet summary appears Block Double Block Script (Italics) Monograms 30/20/15mm (sideways motion) • 98 for more information on Full Stitch Summary see page 264 •••••••••••••••••••••••••• Lettering – Summary 030794.71.
s097-108_e 19.4.
s097-108_e 19.4.2004 16:22 Uhr Seite 100 Combining Lettering (9mm) Stitch: Needle: Thread: Feed dog: Presser foot: Letters 9mm size and type suitable for the fabric selected cotton, decorative up (sewing position) Reverse pattern foot No. 1C Letters 9mm individual letters and rows of the same letter of the same alphabet are sewn in Single Mode letters for names, addresses, words, etc.
s097-108_e 19.4.
s097-108_e 19.4.2004 16:22 Uhr Seite 102 Combination Sub-divider • Combination Sub-divider is used to stitch a text, e.g.
s097-108_e 19.4.
s097-108_e 19.4.2004 16:22 Uhr Seite 104 Size 1 Monograms Stitch: Needle: Thread: Feed dog: Presser foot: Size 1 monograms size and type suitable for the fabric selected cotton, decorative up (sewing position) Sideways motion foot No.
s097-108_e 19.4.2004 16:22 Uhr Seite 105 Adding Letter Using the Template use template to add letter on fabric. Again: mark starting point, select letter, place presser foot as shown on template, and stitch letter Connecting Monogram Combinations Automatically With 16 Directional Sewing Instead of combining monogram letters manually, they can be combined automatically using the template and the 16 Directional Sewing function.
s097-108_e 19.4.
s097-108_e 19.4.2004 16:22 Uhr Seite 107 Size 2 and 3 Monograms Monogrammgrössen 2 und 3 Stitch: Needle: Thread: Feed dog: Presser foot: Size 2 and 3 monograms size and type suitable for the fabric selected cotton, decorative up (sewing position) Sideways motion foot No.
s097-108_e 19.4.
s109-134_e 19.4.
s109-134_e 19.4.2004 16:24 Uhr Seite 110 Stitch Summary Summary Application of Buttonholes Standard Buttonhole Light- to mediumweight fabrics. Blouses, dresses, bedding, etc. Narrow buttonhole (heirloom sewing) Light- to mediumweight fabrics. Blouses, dresses, children’s and baby clothes, dolls’ clothes, crafts Stretch buttonhole All stretch fabrics made from cotton, wool, silk and synthetic fibers Hand-look buttonhole Light- to mediumweight woven fabrics.
s109-134_e 19.4.2004 16:24 Uhr Seite 111 In General Buttonholes are practical closures which can also be used for a decorative effect. The artista 200 provides a very versatile selection. All buttonholes can be sewn and programmed in a variety of ways.
s109-134_e 19.4.2004 16:24 Uhr Seite 112 Important Buttonhole Information Marking Buttonholes Manual Buttonholes • Buttonhole foot No. 3C the buttonhole length of manually stitched buttonholes must be marked on the fabric in the appropriate position Automatic Buttonholes • Automatic buttonhole foot No.
s109-134_e 19.4.2004 16:24 Uhr Seite 113 Thread Tension • • • the tension is set automatically when a buttonhole is selected the upper tension is slightly looser than normal this gives a slightly rounded appearance to the beads, making the buttonhole more attractive Balance for Buttonholes Balance for Direct Entry Length Standard Buttonhole • any Balance alterations affect both beads Note: With Direct Entry Length and Manual buttonholes each individual buttonhole sequence can be balanced separately.
s109-134_e 19.4.2004 16:24 Uhr Seite 114 Corded Buttonholes Cords • gimp cord reinforces buttonholes and enhances their appearance • the loop of the cord should be at the end of the buttonhole most subject to wear • position the work accordingly under the presser foot • gimp cord is particularly recommended for standard and stretch buttonholes Suitable Cords: • Perle cotton No. 8 • strong hand-sewing thread • fine crochet yarn Attaching the Cord Onto Presser Foot No.
s109-134_e 19.4.2004 16:24 Uhr 3A Seite 115 Attaching Cord in Automatic Buttonhole Foot No.
s109-134_e 19.4.2004 16:24 Uhr Seite 116 Automatic Buttonhole (All Types) Direct Entry Length • • enter the buttonhole length (buttonhole opening in mm) directly with the stitch length or stitch width knob suitable for all buttonhole lengths of 4mm up to the maximum length Entering Buttonhole Length • buttonholes can be sewn to a specific length with the Automatic buttonhole foot No.
s109-134_e 19.4.2004 16:24 Uhr Seite 117 Automatic Buttonhole (Standard and Stretch) Button Measuring on Screen The buttonhole size can be determined by holding a button on the screen. The length will be determined by the stitch width or stitch length knob.
s109-134_e 19.4.2004 16:24 Uhr Seite 118 Buttonhole in Long Term Memory Long term saving of buttonhole programs is only possible for buttonholes originally stitched as «auto» length buttonholes.
s109-134_e 19.4.2004 16:25 Uhr Seite 119 Automatic Buttonholes (Standard and Stretch) Without Stitch Counter Buttonhole Stitch: Needle: Thread: Feed dog: Presser foot: Standard and Stretch buttonholes No. 51, 52 and 53 size and type suitable for the fabric selected cotton or polyester up (sewing position) Automatic buttonhole foot No. 3A Automatic Buttonhole • the lens on the Automatic buttonhole foot No.
s109-134_e 19.4.2004 16:25 Uhr Seite 120 Important: How to Correct Mistakes touch the Pattern Begin function • the sewing computer reverts to the beginning of the buttonhole Deleting Saved Buttonholes press external «clr» button or touch «recording» • «auto» disappears and «recording» appears • a new buttonhole length can be programmed TIP Exact duplicates The «auto» function ensures that each buttonhole will be exactly the same length as the previous one.
s109-134_e 19.4.2004 16:25 Uhr Seite 121 Automatic Round, Keyhole and Hand-look Buttonholes Without Stitch Counter Buttonhole Stitch: Needle: Thread: Feed dog: Presser foot: Round and Hand-look buttonholes No. 54 + 55 + 63 and Keyhole buttonholes No. 56–58 size and type suitable for the fabric selected cotton or polyester up (sewing position) Automatic buttonhole foot No. 3A Automatic Buttonhole • the lens on the Automatic buttonhole foot No.
s109-134_e 19.4.
s109-134_e 19.4.2004 16:25 Uhr Seite 123 Stitch Counter Buttonholes for All Buttonhole Types Stitch: Needle: Thread: Feed dog: Presser foot: Buttonholes (all types) size and type suitable for the fabric selected cotton or polyester up (sewing position) Buttonhole foot No. 3C or Automatic buttonhole foot No.
s109-134_e 19.4.
s109-134_e 19.4.2004 16:25 Uhr Seite 125 Manual 4 or 6 Step Buttonholes (All Types) Stitch: Needle: Thread: Feed dog: Presser foot: any Buttonhole size and type suitable for the fabric selected cotton or polyester up (sewing position) Buttonhole foot No. 3C Note: Sewing buttonholes manually is ideal if you only need to sew one; also for repairing existing buttonholes. The number of steps depends on the type of buttonhole. A manually sewn buttonhole cannot be saved.
s109-134_e 19.4.
s109-134_e 19.4.2004 16:25 Uhr Seite 127 Straight Stitch Buttonhole Stitch: Needle: Thread: Feed dog: Presser foot: Straight stitch buttonhole No. 59 size and type suitable for the fabric selected cotton or polyester up (sewing position) Buttonhole foot No. 3C or Automatic buttonhole foot No. 3A Automatic Program With Automatic Buttonhole Foot No. 3A The lens on the Automatic buttonhole foot No. 3A automatically registers the length of the buttonhole (so it can be duplicated exactly).
s109-134_e 19.4.
s109-134_e 19.4.2004 16:25 Uhr Seite 129 Bound Buttonhole Stitch: Needle: Thread: Feed dog: Presser foot: Straight stitch buttonhole No. 59 80 – 100 H cotton or polyester up (sewing position) Buttonhole foot No. 3C or Automatic buttonhole foot No. 3A For topstitching: Straight stitch foot with sliding sole No. 53 (optional accessory) Suitable Material for Bound Buttonholes • synthetic leather • leather • Alcantara • plastic coated fabrics Sewing Bound Buttonhole 1.
s109-134_e 19.4.2004 16:25 Uhr Seite 130 4. Pressing Welts press welts on the wrong side of the fabric or baste, so that two equally big strips are formed on the right side 5. Edgestitching edgestitch the buttonhole (see picture) place facing on the wrong side 6. Topstitching Buttonhole topstitch buttonhole with the Straight stitch foot with sliding sole No. 53 on the right side (including facing) 7.
s109-134_e 19.4.2004 16:25 Uhr Seite 131 Decorative Buttonholes Stitch: Needle: Thread: Feed dog: Presser foot: Buttonholes (all types) size and type suitable for the fabric selected cotton, polyester or embroidery threads up (sewing position) Reverse pattern foot No. 1C (for topstitching) Buttonhole foot No. 3A or No.
s109-134_e 19.4.2004 16:25 Uhr Seite 132 Button Sew-on Program Stitch: Stitch width: Needle: Thread: Feed dog: Presser foot: Button sew-on program No. 60 depends on the distance between the holes size and type suitable for the fabric selected cotton or polyester down (darning position) Button sew-on foot No. 18 Note: Buttons with 2 and 4 holes can be attached with presser foot No. 18. The shank (thread length between button and fabric) can be made shorter or longer as desired.
s109-134_e 19.4.2004 16:25 Uhr Seite 133 Zig-zag or Straight Stitch Eyelets Stitch: Needle: Thread: Feed dog: Presser foot: Narrow zig-zag eyelet No. 61 or Straight stitch eyelet No. 62 size and type suitable for the fabric selected cotton or polyester up (sewing position) Reverse pattern foot No. 1C Note: Eyelets are ideal openings for cords and narrow ribbons, attractive decorative elements, ideal for children’s clothing, and crafts. They cannot be programmed in stitch combinations.
s109-134_e 19.4.2004 16:25 Uhr Seite 134 134 030794.71.
s135-148_e 19.4.2004 16:25 Uhr Seite 135 Stitch Summary 136 Important Information on Different Techniques 137 Quilters Securing Program 138 • Stitch No. 324 Quilting Straight Stitch 139 • Stitch No. 325 Piecing Stitch/Straight Stitch 140 • Straight stitch No. 326 Hand-look Quilt Stitch 141 • Stitches No. 328, 346–350 Decorative Quilt Stitches 142 • Stitches No. 327, 332–345, 351 Satin Stitch 143 • Stitch No. 354 Blanket Stitches 145 • Stitches No.
s135-148_e 19.4.2004 16:25 Uhr Seite 136 Quilt Stitches Summary Quilt Stitches Different stitches can be selected which can be used especially for quilting, patchwork or for appliqué: No. No. No. No. No. No. No. No. No. No. No. No. No. No. No.
s135-148_e 19.4.2004 16:25 Uhr Seite 137 Important Information on Different Techniques Patchwork, Appliqué and Quilting Patchwork • with this technique fabric of different colors, forms and patterns are sewn together to make blankets, wall hangings and garments • for the design of patchwork basic geometric forms are most suitable, e.g. different rectangular and triangular forms as well as squares Stitch for patchwork: • No.
s135-148_e 19.4.2004 16:25 Uhr Seite 138 Quilters Securing Program Stitch: Needle: Thread: Feed dog: Presser foot: Quilters securing program No. 324 size and type suitable for the fabric selected cotton, decorative or monofilament up (sewing position) Reverse pattern foot No. 1C or Walking foot No.
s135-148_e 19.4.2004 16:25 Uhr Seite 139 Quilting Straight Stitch Stitch: Needle: Thread: Feed dog: Presser foot: Quilting straight stitch No. 325 size and type suitable for the fabric selected cotton, decorative or monofilament up (sewing position) Reverse pattern foot No. 1C or Walking foot No.
s135-148_e 19.4.2004 16:25 Uhr Seite 140 Piecing Stitch / Straight Stitch Stitch: Needle: Thread: Feed dog: Presser foot: Piecing stitch / Straight stitch No. 326 size and type suitable for the fabric selected cotton up (sewing position) Reverse pattern foot No. 1C or Patchwork foot No.
s135-148_e 19.4.2004 16:25 Uhr Seite 141 Hand-look Quilt Stitch Stitch: Needle: Needle thread: Bobbin thread Feed dog: Presser foot: Hand-look quilt stitches No. 328, 346–350 size and type suitable for the fabric selected monofilament 50 or 30 weight cotton up (sewing position) Reverse pattern foot No. 1C or Walking foot No.
s135-148_e 19.4.2004 16:25 Uhr Seite 142 Decorative Quilt Stitches Stitch: Needle: Thread: Feed dog: Presser foot: Decorative quilt stitches No. 327, 332–345, 351 size and type suitable for the fabric selected cotton or decorative up (sewing position) Reverse pattern foot No. 1C or Open embroidery foot No.
s135-148_e 19.4.2004 16:26 Uhr Seite 143 Satin Stitch Stitch: Needle: Thread: Feed dog: Presser foot: Satin Stitch No. 354 size and type suitable for the fabric selected cotton, polyester, decorative up (sewing position) Appliqué foot No. 23 (optional accessory), Reverse pattern foot No. 1C or Open embroidery foot No. 20C Satin Stitch • applying decorative appliqués • suitable for many fabrics Note: Instead of double-sided adhesive stabilizer use fabric spray adhesive.
s135-148_e 19.4.2004 16:26 Uhr Seite 144 Sewing Rectangular Corners (90°) sew 3-4 stitches over the outer fabric edge stitch over edge of the motif, needle position down and turn sewing continue sewing, the corner will be oversewn twice Sewing Obtuse Inside Corners (100°) sew until the needle is down in the middle of the angle inside the motif sew the corner in form of sun rays, i.e. needle down always at the same point on the motif, turn sewing slightly, sew two stitches, etc.
s135-148_e 19.4.2004 16:26 Uhr Seite 145 Blanket Stitches Stitch: Needle: Thread: Feed dog: Presser foot: Blanket stitches No. 329, 330, 352, 353 size and type suitable for the fabric selected cotton, decorative up (sewing position) Reverse pattern foot No. 1C or Open embroidery foot No. 20C Blanket Stitches • stitches No. 329 and No. 352 are for light- to mediumweight fabrics • stitches No. 330 and No. 353 are for mediumto heavyweight fabrics Sewing With Blanket Stitch No. 329 or No.
s135-148_e 19.4.2004 16:26 Uhr Seite 146 Turned-edge Appliqués Stitch: Needle: Thread: Feed dog: Presser foot: Blindstitch No. 331 size and type suitable for the fabric selected monofilament up (sewing position) Reverse pattern foot No.
s135-148_e 19.4.2004 16:26 Uhr Seite 147 Variations Use Paper Template Instead of Press-on Stabilizer use thicker paper as template instead of press-on stabilizer • by removing the paper before sewing, the appliqué will be softer (covers, cushions, etc.
s135-148_e 19.4.2004 16:26 Uhr Seite 148 Freehand Quilting Stitch: Needle: Thread: Feed dog: Presser foot: Quilting straight stitch No. 325 size and type suitable for the fabric selected monofiliament, cotton or decorative down (darning position) Darning foot No. 9 or Quilting foot No.
s149-152_e 19.4.2004 16:26 Uhr Seite 149 Programming Screen 150 Selecting Motifs 151 Deleting Motifs 151 Altering Motifs 152 Personal Program 030794.71.
s149-152_e 19.4.2004 16:26 Uhr Seite 150 Programming Screen With Personal Stitches Use the Personal Program to design a screen with the stitches you use most. Whether it is made up of stitches for a certain type of sewing, such as heirloom or garment, or just your favorite practical and decorative stitches or alphabets, this screen will make it easy and quick to sew any project. When inserting stitches into the Personal Program, variations of all stitches may be entered into the Personal Program.
s149-152_e 19.4.
s149-152_e 19.4.2004 16:26 Uhr Seite 152 Altering Stitches Activating Personal Program press the Personal Program button Personal Program Screen select the stitch to be altered (e.g.
s153-158_e 19.4.2004 16:27 Uhr Seite 153 Programming and Saving 154 • In general • Stitch combinations • Opening saved combinations Corrections and Alterations 157 • Deleting • Inserting stitch combinations • Sub-dividing combinations Saving and Deleting Stitches and Stitch Combinations 030794.71.
s153-158_e 19.4.2004 16:27 Uhr Seite 154 In General Stitches, letters, and numbers can be combined and stored in the memory system. The sewing computer has a memory system, in which the two memories – sewing and embroidery – can be stored. The storage space is not sub-divided into fixed spaces, i.e. any number of stitch combinations can be stored in the Drawers as long as there is free storage space (capacity) available.
s153-158_e 19.4.
s153-158_e 19.4.
s153-158_e 19.4.2004 16:27 Uhr Seite 157 Correcting Stitch Combinations Deleting the Stitch Last Programmed touch «Delete» • the stitch last entered is deleted Note: All alterations always affect the area above the cursor.
s153-158_e 19.4.2004 16:27 Uhr Seite 158 Mirroring Entire Combinations touch Multifunction button touch «Mirror Combination» • the entire combination is mirrored horizontally (left/right) Sub-dividing Combinations • a combination can be divided into different parts with the function «Combination Sub-Divider (2)» (e.g. name, street, place, etc.
s159-170_e 19.4.2004 16:27 Uhr Seite 159 In General 160 Display 161 Sewing Settings 162 Embroidery Settings 163 Touch (Screen Sensitivity) 165 Customize Favorite Function Button 166 Software and Language 166 Messages and Audio Settings 167 Portal Provider Settings 169 Reset to Factory 170 Setup Program 030794.71.
s159-170_e 19.4.2004 16:27 Uhr Seite 160 In General The Setup Program allows you to personalize the touch screen to suit your own requirements and preferences. For example, you can change the setting of the thread tension or reprogram the Favorite Function button on the head frame. After setting the sewing computer to your personal requirements all changes made in the Setup Program will be saved, even when the sewing computer is turned off («0»).
s159-170_e 19.4.
s159-170_e 19.4.2004 16:27 Uhr Seite 162 Sewing Settings Opening Setup Program press the external Setup button • menu appears touch «Sewing Settings» • the screen «Sewing Settings 1» appears Sewing Settings 1 Sewing Light • when the bar is active (blue) the sewing light will be on continuously when the sewing computer is turned on • when the bar is inactive (x) the sewing light will not come on when the sewing computer is turned on Motor Speed touching «+» or «–» changes the maximum speed (4/4).
s159-170_e 19.4.2004 16:27 Uhr Seite 163 Embroidery Settings Opening Setup Program press the external Setup button • menu appears touch «Embroidery Settings» • the screen «Embroidery Settings 1» appears for adjusting the embroidery hoop Embroidery Settings 1 «Adjust Reference Position» calibrates the needle to the center of the embroidery hoop. Adjusting can only be activated if the embroidery module and the oval embroidery hoop are attached.
s159-170_e 19.4.2004 16:27 Uhr Seite 164 To Next Page touch «To Next Page» • the next screen appears To Previous Page touch «To Previous Page» • the previous screen appears Saving and Closing touch «OK» • changes are saved, the screen closes and the menu appears Closing Screen touch «ESC» • the screen display closes, the original settings remain saved and the menu appears 164 Setup Program 030794.71.
s159-170_e 19.4.
s159-170_e 19.4.2004 16:27 Uhr Seite 166 Customize Favorite Function Button Opening Setup Program press the external Setup button • menu appears touch «Customize Favorite Function Button» • the screen «Customize Favorite Function Button» appears Customize Favorite Function Button • the basic setting on the Favorite Function button is «Pattern Begin», which is visible as active function in the «F» bar from the on-screen function button summary another desired function can be selected, e.g.
s159-170_e 19.4.
s159-170_e 19.4.2004 16:28 Uhr Seite 168 Messages and Audio Settings Page 3 touch «To Next Page» • the screen «Messages and Audio Settings Page 3» appears • following messages can be turned on or off as well as indicated acoustically with the desired choice of sounds (1-6): • Bobbin Winder • Embroidery Finished • Thread Cutter • Threader • the messages and choice of sounds can be turned on or off independently (i.e.
s159-170_e 19.4.
s159-170_e 19.4.
s171-182_e 19.4.2004 16:28 Uhr Seite 171 Help 172 Tutorial 173 Creative Consultant 175 Balance 177 • Balance for practical and decorative stitches • Balance for sideways motion stitches Cleaning and Maintenance 179 Trouble Shooting 180 Sewing and Sewing Computer Support 030794.71.
s171-182_e 19.4.2004 16:28 Uhr Seite 172 Help Program The Help program provides on-screen information on individual stitches and all functions on the screen, eliminating the need to regularly refer to the instruction manual. The information shown corresponds to information in the instruction manual, but is quicker and easier to find electronically. No matter which screen is displayed, the help feature for stitches and functions of the screen can be opened. Touch «ESC» to return to the previous screen.
s171-182_e 19.4.2004 16:28 Uhr Seite 173 Opening Tutorial press external «Tutorial» button Note: In computer language, tutorial means self-help. The Tutorial provides concentrated on-screen information about various aspects of the sewing computer, eliminating the need to refer regularly to the instruction manual.
s171-182_e 19.4.
s171-182_e 19.4.2004 16:28 Uhr Seite 175 The Creative Consultant provides information and help for a variety of sewing needs. After entering the type of fabric and technique you wish to use, the Creative Consultant provides suggestions regarding needles, presser feet, feed dog, stabilizers, presser foot pressure, etc. The suggested presser feet are not necessarily standard with the sewing computer but may be special accessories which can be obtained from your BERNINA dealer.
s171-182_e 19.4.
s171-182_e 19.4.2004 16:28 Uhr Seite 177 All stitches are checked and fully adjusted before the sewing computer leaves the factory. Different fabrics, threads, stabilizers and interfacings can affect programmed stitches so that sometimes they might not close or they might overlap, i.e. the stitches that make up the pattern are too close together or too far apart. These effects can be corrected with the electronic Balance so that the stitch formation can be adjusted where necessary to suit the fabric.
s171-182_e 19.4.2004 16:28 Uhr Seite 178 Balance for Sideways Motion Stitches Fabric, thread, stabilizers and interfacings can affect sideways motion stitches, so correcting with the Balance will sometimes be necessary.
s171-182_e 19.4.2004 16:28 Uhr Seite 179 Cleaning If the sewing computer is stored in a cold room, it should be brought to a warm room about 1 hour before use. Cleaning the Stitch Plate Area Periodically remove thread lint and remnants which collect under the stitch plate and the hook.
s171-182_e 19.4.2004 16:28 Uhr Seite 180 Prevention and Remedy of Failures In most cases you will be able to identify and remedy faults by checking the following.
s171-182_e 19.4.2004 16:28 Uhr Seite 181 Messages In special cases messages may appear on the screen. They serve as a reminder, warning, or confirmation of selected applications and functions. Messages • Security Program active. Please deactivate before sewing. • This number is not available in the sewing computer! • Combi Mode does not support this pattern! • Please switch feed dog to sewing position. • Please check the upper thread. • Bobbin winder is on. • Please check the lower thread.
s171-182_e 19.4.2004 16:28 Uhr Seite 182 Messages 182 • The BERNINA Modem cannot be identified. Please insert the Modem and try again. • Cannot dial, please check the phone line and then dial number. • The authentication for the provider failed. Please check the username and the password. • The communication with the provider was interrupted. Please try later or use another provider. • An unknown error occurred with the Modem. Please try again.
s183-186_e 19.4.2004 16:29 Uhr Seite 183 BERNINA Computer System 184 Peripherals 184 Connecting Peripherals 186 Connecting Peripherals 030794.71.
s183-186_e 19.4.2004 16:29 Uhr Seite 184 BERNINA Computer System Connect peripherals (special accessories) to turn your artista 200 embroidery computer into an embroidery computer system, and take your hobby to unsuspected heights of creativity.
s183-186_e 19.4.2004 16:29 Uhr Seite 185 Making a Connection connect Modem touch «Portal» confirm message about connecting with «Yes» when the connection to the Provider is made, then confirm the message that appears with «OK» • an overview of the myartista Portal site appears select desired page The content of the myartista Portal is continuously updated.
s183-186_e 19.4.2004 16:29 Uhr Seite 186 Connecting Peripherals (Sewing Computer Compatible) Connecting Peripherals plug external device into socket provided on the right hand side of sewing computer (look for symbol) 1 2 3 Caution: You must only use BERNINA external devices with the BERNINA artista 200 sewing computer.
Inhalt Sticken_e 19.4.2004 16:06 Uhr Seite 187 Embroidery – Content The Embroidery Computer 187–206 Important Embroidery Information 207–214 Embroidery 215–238 Saving and Deleting Motifs 239–244 Embroidery Support 245–250 Peripherals and Accessories 251–256 030794.71.
s187-206_e 19.4.
s187-206_e 19.4.2004 16:30 Uhr Seite 188 Details 1 2 3 4 5 6 Front view Setting up the Embroidery Computer 1 8 8 7 Back view Note: The side view (handwheel) of the sewing and embroidery computer with the connecting slot for embroidery cards and Modem, and the cable connections are shown on page 9 of the sewing computer instruction manual. 188 1 2 3 4 5 6 7 8 The Embroidery Computer – Setting up the Embroidery Computer 030794.71.
s187-206_e 19.4.2004 16:30 Uhr Seite 189 Standard Accessories Large oval embroidery hoop (145x255mm) Template for large oval embroidery hoop Medium embroidery hoop (100x130mm) Template for medium embroidery hoop Small embroidery hoop (72x50mm) (for normal use and free arm embroidery) Blue template for normal embroidery Red template for free arm embroidery Adapter for free arm embroidery Embroidery presser foot No.
s187-206_e 19.4.2004 16:30 Uhr Seite 190 Special (Optional) Accessories Suitcase system for sewing computer and embroidery module Embroidery Mega-Hoop (150x400mm) Template for Mega-Hoop Straight stitch plate BERNINA embroidery cards BERNINA CD-ROM drive (depending on country) BERNINA Modem BERNINA artista software 190 The Embroidery Computer – Setting up the Embroidery Computer 030794.71.
s187-206_e 19.4.
s187-206_e 19.4.2004 16:30 Uhr Seite 192 Protecting the Embroidery Computer from Dust Soft Cover • the soft cover protects from dust and dirt when not using the embroidery computer, leave the soft cover on attach the part of the soft cover meant for the embroidery module with the zipper Connecting the Adapter for Free Arm Embroidery The adapter is used for embroidering tubular items (sleeves, trousers, infant items, socks, etc.) on the free arm of the sewing computer.
s187-206_e 19.4.2004 16:30 Uhr Seite 193 Preparing the Embroidery Computer for Embroidery Embroidery Presser Foot No. 15 attach the Embroidery presser foot No.
s187-206_e 19.4.2004 16:30 Uhr Seite 194 Switching the Embroidery Computer on The artista embroidery system is operated with a combination of external buttons and knobs and a touch screen. turn power switch to «1» (on) Welcome Screen • after turning the embroidery computer on, the Welcome screen appears for a few seconds • a message appears after the Welcome screen to close the message touch «OK» Note: The Welcome screen can be personalized in the Setup Program.
s187-206_e 19.4.
s187-206_e 19.4.
s187-206_e 19.4.
s187-206_e 19.4.2004 16:30 Uhr Seite 198 Selection Menu After turning on the embroidery computer or changing from Sewing to Embroidery Mode, the Selection menu appears. This happens when a motif is selected or combined with an existing motif.
s187-206_e 19.4.2004 16:30 Uhr Seite 199 Common Functions and Displays of Design Menu Edit 1 and Edit 2 Design Menu Edit 1 After selecting a motif the Design Menu Edit 1 appears. In this menu for example new motifs can be selected or combinations made by adding or duplicating. Design Menu Edit 2 The Design menu has a sub menu called Edit 2 which is used to alter motifs (e.g. Rescale Motif Proportionally, Mirror Image, Rotate Motif, etc.).
s187-206_e 19.4.
s187-206_e 19.4.
s187-206_e 19.4.
s187-206_e 19.4.2004 16:30 Uhr Seite 203 Embroidery Menu (Ready) Hoop Display • display of the attached embroidery hoop with stitch field dimensions in mm In the Embroidery menu (Ready) the motif can be embroidered and embroidery related alterations made (e.g. adjusting thread tension, reducing motor speed, etc.).
s187-206_e 19.4.
s187-206_e 19.4.
s187-206_e 19.4.2004 16:30 Uhr Seite 206 206 030794.71.
s207-214_e 19.4.2004 16:31 Uhr Seite 207 In General 208 Embroidery Threads 210 Embroidery Stabilizers 211 Hooping the Fabric 213 Important Embroidery Information 030794.71.
s207-214_e 19.4.2004 16:31 Uhr Seite 208 Embroidery Test always stitch an embroidery test on a sample fabric. Adjust color, thread quality, needle, stitch density, tension, etc. to suit the motif if necessary for the test use the same fabric and stabilizer that you will use on the project Choosing an Embroidery Motif • simple motifs with a low stitch count are suitable for embroidery on fine fabric • large-scale, densely embroidered motifs (e.g.
s207-214_e 19.4.
s207-214_e 19.4.2004 16:31 Uhr Seite 210 Embroidery Threads One of the most important elements in successful embroidery is the quality of the thread. We strongly recommend that you purchase thread from a reputable BERNINA dealer in order to avoid irregularities, thread breakage, etc. which so often occur with poor quality threads. Embroidery is particularly effective if you use glossy rayon or polyester embroidery threads as upper threads.
s207-214_e 19.4.
s207-214_e 19.4.
s207-214_e 19.4.
s207-214_e 19.4.2004 16:31 Uhr Seite 214 Hooping the Fabric place fabric on top of the outer hoop place the marked center point in the center of the template on inner hoop • match the arrows of inner and outer hoops place inner hoop on top of fabric and outer hoop and press into place, loosening screws to accommodate fabric. Tighten screws remove template 214 Important Embroidery Information – Embroidery Stabilizers 030794.71.
s215-238_e 19.4.2004 16:33 Uhr Seite 215 Motifs 216 • Embroidering • Positioning • Altering: mirroring, size • Combining Alphabets – Lettering 226 • In general • Combining lettering Adjustments 232 • Motif colors • Adjusting motifs Applications 235 • Free arm embroidery • Lace • Borders • Shadow Embroidery Embroidery 030794.71.
s215-238_e 19.4.2004 16:33 Uhr Seite 216 In General All motifs can be either embroidered directly or can be combined with the different functions offered by the embroidery computer. Apart from combining designs, it is also possible to rotate the motifs, to alter the stitch density, to allocate another thread color, etc.
s215-238_e 19.4.
s215-238_e 19.4.2004 16:33 Uhr Seite 218 Positioning Motif Positioning Motif in Desired Location By moving or rotating the motif can be moved to another position within the hoop. Preparation select desired motif from the Selection menu • the motif appears in the Design Menu Edit 1 use the «To Next Page» symbol to change to Design Menu Edit 2 Note: If the knobs are turned slowly the motif can be moved step by step (step length = 1/10mm).
s215-238_e 19.4.2004 16:33 Uhr Seite 219 Checking the Motif Position With the functions «Check» and «Motif Center» the motif position can be checked before embroidering.
s215-238_e 19.4.
s215-238_e 19.4.2004 16:33 Uhr Seite 221 Altering Motif Size Each motif can be proportionally enlarged or reduced as well as rescaled horizontally or vertically. Note: To get good results, the motifs should be scaled within the limits of 75% to 150%.
s215-238_e 19.4.2004 16:33 Uhr Seite 222 Adjust the Motif Height or Width Note: If the knobs are turned slowly the motif size can be altered in 1% steps.
s215-238_e 19.4.2004 16:33 Uhr Seite 223 Combining Motifs Motifs can be combined as desired with the embroidery computer to create completely new designs. A combination can consist of several identical motifs or of different ones. It is also possible to combine motifs with lettering. Application • combining motif variations • creating new designs • embroidering borders • creating logos, crests, badges, labels, etc.
s215-238_e 19.4.2004 16:33 Uhr Seite 224 Creating Motif Combination With functions such as «Move Motif», «Rotate Motif» «Mirror Image», etc. the motif combination can be created as desired.
s215-238_e 19.4.
s215-238_e 19.4.2004 16:33 Uhr Seite 226 Letters can be combined with other letters or motifs and embroidered with the embroidery computer. The artista 200 embroidery computer's Design Menu Edit 2 offers a large variety of alteration possibilities: Apart from altering the letter size, the baseline type amongst other things, can be altered. For instance arched letters can be made from horizontally arranged letters.
s215-238_e 19.4.
s215-238_e 19.4.
s215-238_e 19.4.2004 16:34 Uhr Seite 229 Selecting the Most Appropriate Hoop for Adjusted Motif Size The best embroidery results are achieved by selecting the most appropriate hoop for the motif size. • for more information on Selecting the Most Appropriate Hoop see pages 196/199 •••••••••••••••••••••••••••••••••••••••• Calculating New Embroidery Data After changing from Design Menu Edit 2 to Embroidery menu (Ready) the new embroidery data is recalculated according to the changes made.
s215-238_e 19.4.
s215-238_e 19.4.2004 16:34 Uhr Seite 231 Altering Text to Suit Motif use the «To Next Page» symbol to change to Design Menu Edit 2 position the text as desired with the function «Move Motif» alter text size to suit motif with the functions «Rescale Motif Proportionally» or «Rescale Motif Height or Width» Calculating New Embroidery Data After changing from Design Menu Edit 2 to Embroidery menu (Ready) the new embroidery data is recalculated according to the changes made.
s215-238_e 19.4.2004 16:34 Uhr Seite 232 Motif Colors The motif colors can be changed as well as embroidered in different ways.
s215-238_e 19.4.
s215-238_e 19.4.2004 16:34 Uhr Seite 234 Adjusting Motifs Special fabrics (e.g. toweling, velvet, etc.), thinner or thicker threads can influence the embroidery result.
s215-238_e 19.4.2004 16:34 Uhr Seite 235 Free Arm Embroidery Free arm embroidery is suitable for lettering and small motifs (not larger than 72x50mm). Application • embroidering closed items such as sleeves, trousers, socks, etc.
s215-238_e 19.4.2004 16:34 Uhr Seite 236 Embroidering Lace • • lace motifs can be embroidered directly onto fabric. For a true lace effect, however, embroider the motif on water soluble stabilizer, and then use it as lace use fine thread for fine embroidery.
s215-238_e 19.4.2004 16:34 Uhr Seite 237 Embroidering Borders • • embroidered borders can be made either from several small motifs or from long rows of aligned motifs borders are perfect for decorative embellishment of table and bedlinen, drapery and skirt hems, etc. Preparation use basting stitch (stitch No.
s215-238_e 19.4.2004 16:34 Uhr Seite 238 Shadow Embroidery A shadow effect is acquired if the same embroidered lettering or word in another color is placed slightly offset on top of an already embroidered lettering or word.
s239-s244_e 19.4.
s239-s244_e 19.4.2004 16:42 Uhr Seite 240 In General Motifs from the embroidery computer, personal design cards, CD-ROMs or the myartista Portal, as well as motifs created in the BERNINA artista software, can be combined, rearranged, and altered in different ways, then saved. Motifs can either be saved to the embroidery computer or on a personal design card. Open desired motif from embroidery computer, personal design card or peripheral source. Alter or combine motif if desired.
s239-s244_e 19.4.
s239-s244_e 19.4.
s239-s244_e 19.4.
s239-s244_e 19.4.
s245-250_e 19.4.2004 16:42 Uhr Seite 245 Thread Breakage While Embroidering 246 Trouble Shooting 247 • Prevention and remedy of failures • Messages Embroidery Support 030794.71.
s245-250_e 19.4.2004 16:42 Uhr Seite 246 It is possible that the upper or lower thread may run out or break while embroidering. In this case the embroidery computer stops automatically provided that the upper and lower thread sensors are activated.
s245-250_e 19.4.2004 16:42 Uhr Seite 247 Prevention and Remedy of Failures Note the following advice to recognize the causes of most of the operation failures in the embroidery computer that might occur.
s245-250_e 19.4.2004 16:42 Uhr Seite 248 Messages In special cases messages may appear on the screen. They serve as a reminder, warning, or confirmation of selected applications and functions. • Possible Messages regarding the sewing computer see page 181 ••••••••••• Below, the embroidery module messages are listed, together with the appropriate action to be taken in each case. Message 248 • The embroidery computer cannot change to sewing.
s245-250_e 19.4.2004 16:42 Uhr Seite 249 Message • The attached hoop is too small for this design. Please press «Edit» button to return to previous screen, change hoop and press «OK» for hoop detection. • You have changed the hoop attachment (from «normal» to «free-arm» or vice versa). Please press «check» button to start module calibration. • ADX: Please switch to Embroidery Mode to stitch out the motif.
s245-250_e 19.4.2004 16:42 Uhr Seite 250 Message 250 • The downloaded data is invalid. Please try later. • The BERNINA Modem cannot be identified. Please insert the Modem and try again. • Cannot dial, please check the phone line and then dial number. • The authentication for the provider failed. Please check the username and the password. • The communication with the provider was interrupted. Please try later or use another provider. • An unknown error occurred with the Modem.
s251-256_e 19.4.2004 16:45 Uhr Seite 251 Peripherals 252 • BERNINA computer system • Connecting peripherals Accessories 254 • Suitcase system • Embroidery Mega-Hoop • Embroidery cards • BERNINA artista software Peripherals and Accessories 030794.71.
s251-256_e 19.4.2004 16:45 Uhr Seite 252 BERNINA Computer System Connect peripherals (special accessories) to turn your artista 200 embroidery computer into an embroidery computer system, and take your hobby to unlimited heights of creativity. In addition to a direct connection with the myartista Portal (information source), which takes you to the Portal site especially created for the embroidery computer, it is also possible, for instance, to get extra motifs from a BERNINA CD-ROM.
s251-256_e 19.4.2004 16:45 Uhr Seite 253 External CD-ROM drive Using the external BERNINA CD-ROM drive, BERNINA embroidery CD-ROMs can be opened directly on the embroidery computer. Connect CD-ROM drive and insert a BERNINA CD-ROM. touch «CD-ROM» in the Embroidery Mode • the motifs from the CD-ROM are displayed in color on the screen touch the motif selected Note: When combining designs from different CD-ROM’s, each motif has to be saved first to the embroidery computer (see page 240).
s251-256_e 19.4.2004 16:45 Uhr Seite 254 BERNINA offers a variety of extras (special accessories: presser foot, magnifying lens, multi spool holder, Mega-Hoop, embroidery design cards) to go with the sewing and embroidery system artista 200, for new and unlimited opportunities. Ask your BERNINA dealer for more information.
s251-256_e 19.4.2004 16:45 Uhr Seite 255 Embroidery Mega-Hoop Use the embroidery Mega-Hoop to stitch extra large motifs, large design combinations, or long borders with ease. With the Mega-Hoop three embroidery positions are possible. If the Mega-Hoop has been repositioned, the embroidery computer stops and a message indicates, to which embroidery position (1, 2 or 3) the Mega-Hoop has to be moved.
s251-256_e 19.4.2004 16:45 Uhr Seite 256 BERNINA artista Embroidery Software Use the BERNINA artista PC software to combine, extend, and change existing motifs on a personal computer (PC). The software even allows you to create motifs all on your own.
s257-259_e 19.4.2004 16:46 Uhr Seite 257 Glossary Add • to add means to combine by addition, to join, to increase • adding a new motif auto • for example in connection with sewing buttonholes: • if the length is preprogrammed «auto» appears, i.e.
s257-259_e 19.4.
s257-259_e 19.4.
s260-265_e 19.4.2004 16:52 Uhr Seite 260 Practical Stitches Buttonholes 16 Directions Sewing 4 Directions Sewing Decorative Stitches 9mm / 40mm 260 Stitch Summary – artista 200 030794.71.
s260-265_e 19.4.2004 16:52 Uhr Seite 261 Stitch Summary – artista 200 030794.71.
s260-265_e 262 19.4.2004 16:52 Uhr Seite 262 Stitch Summary – artista 200 030794.71.
s260-265_e 19.4.2004 16:52 Uhr Seite 263 Zodiacs Quilt Stitches Stitch Summary – artista 200 030794.71.
s260-265_e 19.4.2004 16:53 Uhr Seite 264 Alphabets 264 Stitch Summary – artista 200 030794.71.
s260-265_e 19.4.2004 16:53 Uhr Seite 265 Stitch Summary – artista 200 030794.71.
s266-270_e 19.4.2004 16:50 Uhr Seite 266 Spring Daffodils 160 Iris 171 137 51 Floral wreath 96 127 Length in mm 266 51 57 52 61 11 Width in mm 137 Butterfly 98 88 Little pansies 94 27 Embroidery time in minutes Embroidery Design Collection – artista 200 030794.71.
s266-270_e 19.4.2004 16:50 Uhr Seite 267 Summer Little wild rose 62 58 14 Flowers with butterfly 61 127 13 White rose 196 Fuchsia 216 119 88 Lace border 52 134 65 Daisy 50 148 34 36 4 Embroidery Design Collection – artista 200 030794.71.
s266-270_e 19.4.2004 16:50 Uhr Seite 268 Fall 3 Quilts 49 140 153 23 140 Grape leaf 158 97 111 55 Mushrooms 121 7 Sunflower 268 Quiltoutline 61 13 Embroidery Design Collection – artista 200 030794.71.
s266-270_e 19.4.2004 16:50 Uhr Seite 269 Winter Sprig of pine 178 105 Holly and bird 120 65 66 95 13 55 Lace heart 164 119 Royal fdl 46 Holly and heart 114 40 126 37 Embroidery Design Collection – artista 200 030794.71.
s266-270_e 19.4.2004 16:50 Uhr Seite 270 Alphabets Alice Font height: min. 8mm / max. 50mm Blackboard Font height: min. 8mm / max. 50mm Cursive Font height: min. 7mm / max. 60mm Drifter Font height: min. 6mm / max. 40mm Lisa Font height: min. 13mm / max. 75mm London Font height: min. 8mm / max. 50mm Varsity block Font height: min. 6mm / max. 35mm 270 Embroidery Design Collection – artista 200 030794.71.04_0401_a200_EN Childs Play Font height: min. 13mm / max.
s271-272_e 19.4.
s271-272_e 19.4.