Instruction manual

30
Functions
Functions
Overview «Function»-buttons sewing computer
«Quick reverse»-button
̶ secures the seam beginning and end: sews in
reverse as long as the button is pressed
̶ used to program the buttonhole length
̶ used to program the darning length
̶ used to determine end of stitching in straight
stitch Securing stitch No. 5
̶ used for securing in Quilters securing program
No. 1324
«Start/Stop»-button
̶ starts and stops the sewing computer when
operating it with or without foot control
̶ starts and stops the BSR-Function if the BSR
foot is attached and activated
«Automatic thread cutter»-button
̶ upper and lower threads are automatically cut
̶ 2-6 securing stitches can be programmed in
the setup program. These are sewn before the
thread is cut
Speed control
̶ sewing-/embroidery speed is infinitely variable
with the slide
«Needle stop»-button
⦁
touch button
►
the needle is raised or lowered in the same
way as by sinking the heel back on the foot
control
Programmable «Pattern end/Securing»-button
⦁
touch button before the sewing starts or
during sewing
►
single pattern is secured at the end, with the
selected number of stitches programmed
⦁
press button before or during sewing of a
combination
►
the active pattern of the combination is
secured at the end, with the selected number
of stitches programmed
⦁
the number and type of the securing stitches
can be programmed in the setup program
►
a stop symbol which appears during sewing
indicates that the function is activated
034790.50.04 _2013-03_Manual_B560_EN