EArtistic View Provides a preview of the motif in actual stitches. • • Select an embroidery motif or an alphabet in embroidery Mode. Select Design Information from the Edit screen. • • Design information is displayed. Press Scroll Forward. • The Artisic View screen appears and the motif is displayed in artistic view. Press Scroll Backwards to close the screen. Touch Esc to return to the Edit Screen.
Checking Max Speed • Touch Reg S.P.M. the Check Speed screen appears. • Press foot control, ease off slightly then press down completely. • The current speed (S.P.M) is displayed. If the speed is over 950 S.P.M., a speed calibration must be performed. Touch Esc. to close the screen. Calibrating the Speed • Touch Max S.P.M. , the Speed Calibration screen appears. • Press the foot control until the sewing computer stops. If the calibration was successful, a green OK will display.
General information: Securing Function (with 4 stitches) (p. 32) • Activate the Securing Function before sewing, while Pattern Begin is active; the sewing computer will secure the beginning and the end of the first stitch with four small stitches. The machine will not stop stitching after securing. • Activate the Securing Function before or while sewing, to secure only at the end of the actual stitch. The sewing computer will not stop sewing after securing.
General information: Scrolling though Stitch Menus • Scrolling within a stitch menu results in the full screen of stitches scrolling rather than one row of stitches at a time. Embroidery –computer working memory • When the working memory of the embroidery computer is near capacity, the following message will appear on screen: “Please save your current motif. Your embroidery computer memory has nearly reached its limit. Switch your embroidery computer off and on again to continue.