Use and Care

13
TIME
The time function allows to manage cooking times.
After setting the function and temperature, press
the touch timer button and choose a time function.
Timer
1. Press TIME.
2. Turn the OK KNOB to select the timer function
3. Press OK KNOB to confi rm
4. Turn the OK KNOB to select the desired time
5. Press OK KNOB to confi rm
6. The countdown start immediately and the di-
splay will show the remaining time
7. Once the set time is fi nished, a sound will be
heard
Note: to change settled time restart from point 1.
This function is only a minute minder and does
not stop the cooking process.This function is avai-
lable also with oven switched off .
End Mode
1. Press TIME.
2. Turn the OK KNOB to select the END function
3. Press OK KNOB to confi rm
4. Turn the OK KNOB to select the desired co-
oking time
5. Press OK KNOB to confi rm
6. The countdown start immediately and the di-
splay will show the remaining time
7. Once the set end of cooking time is fi nished,
a sound will be heard and the oven automati-
cally switches off .
Note: to change selected time restart from point 1
This function is available only when the oven is
working.
Delay Mode
1. Press TIME.
2. Turn the OK KNOB to select the DELAY fun-
ction
3. Press OK KNOB to confi rm
4. Turn the OK KNOB to select the desired co-
oking time
5. Press OK KNOB to confi rm
6. Turn the OK KNOB to select the desired end
of cooking hour and minutes
7. Press OK KNOB to confi rm
8. The display will show the countdown to the
start the cooking
9. Once the countdown is fi nished, a sound will
be heard and the oven automatically switches
on, and the display will show the remaining
time
10. Once the set end of cooking time is fi nished,
a sound will be heard and the oven automati-
cally switches off .
Note: to change selected time restart from point 1
This function is available only when the oven is
working.
If the time functions are not set, the duration of the
cooking must be managed manually.
PROBE
The food probe allows you to choose the level of
cooking by measuring the internal temperature of
the food.
Programming the temperature probe
1. Insert the sharp end of the probe into the food.
For the best results, the tip must be as close
as possible to the centre point of the food, and
not in contact with fat, bone or hollow areas.
2. Chose the cooking function and temerature.
3. Preheat the oven.
4. Press PROBE.
5. Turn the OK KNOB to
set the temperature you
wish to obtain at the centre of the food.
6. Press OK KNOB to confi rm
7. Plug in the probe inside the oven (on the top
left-hand side).
When the set temperature is measured by the
probe, cooking will stop, an audible warning will
sound and a message will be displayed.
When using the temperature probe, only the Timer
function is available.
LIGHT
Use this function to light the oven when the oven
is off (for example to manual clean the oven).
BACK
Use this function to return to the previous pro-
gramm step during time or probe program.
This function does not switch off the oven.
/ Using display
USING THE DISPLAY