Use and Care

/ Accessory

The telescopic glides ﬁ t any shelf level and work

with the wire shelves provided as standard equi-

pment.

Fitting the glides

• Locate the two spring clips at the front and

back of the glides.

• Locate the pin on the glide that indicates the

back.

• Choose the right level and position the

telescopic glide near the upper wire.

• Gently insert the front spring clip on the glide.

• Insert the rear spring clip on the glide.

• Pull and push each glide to ensure the correct

installation and smooth operation.

• Extract both glides to the fully extended

position and place the shelf over them, making

sure it’s accurately placed between the rear

pin and the front pin.

Removing the glides

1 - Locate the two spring clips at the front and

back of the glide.

2 - Gently pull down the front spring clip.

3 - Pull the glide away from the oven side - be

careful not to strain the clip.

4 - Repeat steps 2 - 3 on rear spring clip to remo-

ve glide.

STELESCOPIC GLIDES