Specification Sheet

Besa Lighting Co., Inc. • 6695 Taylor Rd. • Blacklick, OH 43004 • tel [phone] • fax [phone] • www.besalighting.com
120v
PENDANTS
location:
DAMP
interior
All dimensions provided are nominal.
Allowance must be made for dimensional tolerance in handcrafted glasses.
For ordering information, see next page
464588
Pinta 12
*Shown with Edison
lamp option (EDI)
REV 5/13
CFL
SPECIFICATIONS:
DESCRIPTION
Cord-hung, cable-hung or stem-mount pendant with handcrafted
glass diuser.
LAMPING
Standard:100W A19 120V incandescent, suitable for dimming,
lamp not included.
Edison: 40W Edison Filament Medium-based, 120V, lamp included.
Plumen CFL: 11W Plumen CFL Medium-based, 120V,
lamp included.
DIFFUSER
Shade shall be handcrafted glass of clear decor.
Pinta 10: 10.25” Dia. x 9.0” H
Pinta 12: 14.25” Dia. x 11.875” H
Opening sizes: Pinta 10: 85mm min. (top), 204mm min. (bottom)
Pinta 12: 85mm min. (top), 289mm min. (bottom)
3x6mm holes.
SUSPENSION
Cord-hung: 10’ SVT-type cord, complete with 5” decorative sleeve at the
socketholder. Jacket coordinates with metal nish. Available on 1, 3 or 6
light canopies, shown on next page. Plated stamped steel construction.
Bronze or Satin Nickel.
Cable-hung: 1x 10’ aircraft-quality stainless steel cable support
with 10’ AWM-type cord. Jacket coordinates with metal nish.
5” Dia. dome canopy is plated stamped steel. Bronze or Satin Nickel.
Stem-mount: 4 connectable stem sections (3”, 6”, 12” and 18” lengths),
10’ max. 5” Dia. canopy (with swivel) and stem sections are plated steel.
Bronze or Satin Nickel.
MOUNTING
Installs directly to a 4” octagonal ceiling box. Suitable for sloped ceilings.
LABELS
UL or ETL Listed. Suitable for Damp Locations (interior use only).
Consult factory concerning lower wattage labeling for energy
requirements.
pinta 10 / 12
10.25”
9”
14.25”
11.875”
10.25”
9”
14.25”
11.875”
464488
Pinta 10