installation guide
- 11 -
2. Mount the junction box to the tele-
scopic arm (see rough in sketch to se-
lect proper arm) with (2) 3.9x 6mm
Flat Head Screws and (2) 3.9 mm
lock washers. Fig. 11.
3. Mount the two telescopic arms. Insert
the M6x60 lag bolts with 12.5mm
washers - mount in the two key hole
slots first (2 bolts/arm). Make sure the
arms are perpendicular to the ceiling.
Fig 12.
4. Insert the remaining four (4) lag bolts
per arm. Fig. 13.
FIG. 11
FIG. 12
FIG. 13
3.9 X 6 MM FLAT HEAD
SCREW AND 3.9 MM
LOCK WASHER
M6X60
LAG BOLTS
12.5 MM
WASHERS