installation guide
- 14 -
FOR AEIC35SB KIT DUCTED FLUE
VERSION
11. Install flue cover brackets to the arm
brackets using (4) 3.9x6mm flat
head screws and install 6" duct at
ceiling inlet. Fig. 19.
12. Temporarily install upper flue cov-
ers with (4) 2.9x9.5mm pan head
screws(you will need to remove it
when making electrical connec-
tions). Fig. 20.
Note: The non-ducted openings
can be covered on:
- 8-ft. ceiling installations.
- 9-ft. ceiling installations where
bottom of hood is 30" above
cooktop.
Rotate the flue so the non-ducted
openings are at the bottom of the
flue.
Skip to Step 24.
FIG. 19
FIG. 20
3.9 X 6 MM FLAT
HEAD SCREWS (4)
2.9 X 9.5 MM PAN
HEAD SCREWS (4)
6" DUCT
NON-DUCTED
OPENINGS