installation guide

- 15 -
FOR AEIC35SB KIT NON- DUCTED
FLUE VERSION
13. Assemble non-duct plenum to duct
cover rails with (4) 3.9 x 6 mm pan
head screws. Fig. 21.
14. Slide the flue cover rails on the
telescopic arms and attach to arm
brackets using (4) 3.9 x 9 mm flat
head screws. Fig. 21.
15. Install plastic duct connector into
non-duct plenum, then install the 6"
to 5" reducer and seal with duct tape.
Fig. 22.
16. Install 5"x 12.5" expandable duct and
seal with duct tape. Fig. 22.
1 7. Temporarily install upper flue covers
with (4) 3.9x9mm pan head screws
(you will need to remove it when
making electrical connections).
Fig.23.
Skip to Step 24.
FIG. 21
3.9 X 6 MM PAN
HEAD SCREWS (4)
FIG. 22
DUCT CONNECTOR
6" TO 5" REDUCER
3.9 X 9 MM FLAT
HEAD SCREWS (4)
5" EXPANDABLE DUCT
FIG. 23
2.9 X 9.5 MM PAN
HEAD SCREWS (4)