Installation Guide

5
4. REMOVE THE FILTERS
Remove the tape from the filters. Remove the filters from the power pack, and set
aside.
It is recommended to start with the center one(s).
H D1112
5. REMOVE THE GREASE DRIP RAIL
A. Lift and rotate the grease drip rail to disengage it from
the bottom panel.
B. Slide grease drip rail all the way to the left or right and
lift the opposite end to disengage the other end from
the bottom panel. Remove it from the power pack and
set aside for later use.
6. REMOVE THE BOTTOM PANEL
Using a Phillips screwdriver, remove both bottom panel retaining screws and set
aside.
Disassemble bottom panel from power pack and set aside.
H D1111
AB
HO0353
RETAINING
SCREW
RETAINING
SCREW