Installation Guide

- 5 -
3. CUSTOM HOOD PREPARATION
WARNING
When building a custom hood, always follow all applicable construction codes and standards.
VQ0010
!
The custom hood must be constructed to fit the size and shape of the CPD hood liner.
See chart and illustration for details.
* Dimensions A and B include rivets head.
A
B
C
2”
5
1
/8”
C
L
12”
3”
REAR
FRONT
To minimize the gap around the hood liner, take actual width and depth measurements of hood liner and add 1/16” to get D and
E measurements. Cut the hole in the bottom of the cabinet according to dimensions. See chart and illustration for details.
E
HD0367
D
HOOD LINER TOTAL
WEIGHT
RANGE HOOD DIMENSIONS
SERIES MODEL *A *B C
CPD
CPDI362 73
LB 22
1
⁄2” 34
3
⁄8” 5
7
⁄8”
CPDI482 88
LB 22
1
⁄2” 46
3
⁄8” 5
7
⁄8”
CPDI602 102
LB 22
1
⁄2” 58
7
⁄8” 5
7
⁄8”
HOOD LINER CUTOUT DIMENSIONS
SERIES MODEL D E
CPD
CPDI362 22
9
⁄16” 34
7
⁄16”
CPDI482 22
9
⁄16” 46
7
⁄16”
CPDI602 22
9
⁄16” 58
15
⁄16”
4. MOUNT CUSTOM HOOD INTERNAL FRAMEWORK
Since the CPD hood liner mounting holes are located in front and rear sides (see
illustration at right), plan to install wood frame at front and sides for support.
The CPD hood liner is supported by the custom hood internal framework with (12) #8 x ½” flat-head screws (16 screws for
CPDI602) provided in parts bag.
WARNING
The wood hood must be positively secured to wall studs or other wooden framework behind the drywall.
Make sure it is capable of supporting its own weight and the weight of the CPD. Failure to do so may
cause personal injury or damage to countertop or cooktop.
VQ0010
!