installation instructions

- 8 -

13. REINSTALL GREASE DRIP RAIL

A. Center the grease drip rail over the bottom

panel edge and drop it in place.

(Blower shown is for reference only

and does not represent actual

blower in this product.)

HD0291

12. REINSTALL BOTTOM PANEL

Lift the bottom panel and engage the hood liner metal tabs in

bottom panel slots.

Secure the bottom panel to the hood liner using its screws.

Re-install filter filler panels as shown.

RETAINING SCREW LOCATIONS

BOTTOM VIEW

RETAINING SCREW LOCATIONS

NOTE: It is recommended to install side filters first and finish with center filter(s).

1. Insert one end of baffle filter into

the front channel of the hood.

2. Raise the other end toward the

inside of hood liner and insert in

the grease drip rail of the hood

liner.

Replacement filters are available

from your dealer. See label

inside hood liner for size and

part number.

14. REINSTALL BAFFLE FILTERS

CAUTION

Remove protective plastic film covering baffle filters before installing them.

1 2