Service Parts Guide

NLA = no longer available; OBS = obsolete
Island Hoods
26
lower flue SBE3403622
upper flue SBE3403623
lower skeleton SB03120185
upper skeleton SB03120186
fuse (located on control board) SB02300782
hardware package SB080810004
(includes screws, nuts and washers)
IEX222 REV B Heat Sentry April
2003 (BEST)
logo (adhesive silver) SB02011284
(RPL by SV05869)
switch assembly SB06103241
lamp housing/socket (includes bezel, glass & bulb)
SB02300790
transformer SB02300792
transformer after Sept-30-2010 SB02300729
control board (contains fuses) SB08086670
utensil rail front SB02009290
coupling (set of 2) SB02009186
utensil rail side SB02009301
halogen bulb Type JC 12 volt 20 watt SB02300891
filter 9-3/16”x15-5/16” flip latch SB08087141
damper/duct connector (plastic) SB08085018
damper/duct connector (metal) 9/07 SB08092501
lower flue SBE3403622
upper flue SBE3403623
lower skeleton SB03120185
upper skeleton SB03120186
heat sentry SB02300787
fuse (located on control board) SB02300782
hardware package SB080810004
(includes screws, nuts and washers)
IM32I Double Vertigo (BEST) Spring
2011
frame SB08092783
grill SB03115221
grease filter SB08087691
duct-free filter SB08087695
capacitor SB02300976
bulb (Type JC 12 volt 20 watt G4 base) SB02300891
control board SB08080852
heat sentry SB02300804
motor SB02310731
top glass SB02005214
lower flue SBE3350690
upper flue SBE3350691
lower skeleton SB02011387
upper skeleton SB08093200
transformer SB02300861
light socket SB02300798
switch assembly SB06108625
hardware package SB080810953
IM33I GLOSS REV A (BEST) Spring
2011
frame SB03115266
spring SB02000191
grease filter SB08087027
duct-free filter SB03300300
capacitor SB02300233
heat sentry SB02300804
motor SB02310260
blower wheel SB03295071
6” to 5” reducer SB03295018
wires SB02300878
wires SB02300974
duct connector/duct free SB03294535
damper duct connector SB08088378
lower flue SB003102729
upper flue SB08092897
non-duct plenum SB08092898
lower skeleton SBE3403881
upper skeleton SB08092895
control board SB08080855
LED light qty 3 SB02300885
driver/feeder for LEDs SB02300973
(Do not send driver/feeder for LEDs out for REV A
hoods. See note below.*)
flex ducting SB02011452
blower assembly SB06002157
switch assembly SB06103825
hardware package SB080810952
*The original driver/feeder was discontinued. The new
driver/feeder has the same part number but the hood
now has 4 LEDS instead of 3. If someone is in need
of this part we will need to send them a kit containing
a new frame with 4 LEDS. It will include wiring instruc-
tions as well as a sticker for them to place on their
spec label to change the REV of the hood from A to B
Contact Technical Support for kit.
IM33I GLOSS REV B (BEST)
SERIAL 39-11-0001, 4 LED lights
frame SB03115266
spring SB02000191
grease filter SB08087027
duct-free filter SB03300300
capacitor SB02300233
heat sentry SB02300804
motor SB02310260
blower wheel SB03295071
6” to 5” reducer SB03295018
wires SB02300878
wires SB02300974
duct connector/duct free SB03294535
damper duct connector SB08088378
lower flue SB003102729
upper flue SB08092897
non-duct plenum SB08092898
lower skeleton SBE3403881
upper skeleton SB08092895
control board SB08080855
LED light qty 4 SB02300885
driver/feeder for LEDs SB02300998
flex ducting SB02011452
blower assembly SB06002157
switch assembly SB06103825
hardware package SB080810952
IM42I Sphera (BEST) JUNE 2012
frame white SB03102790
frame black SB03102797
grease filter---qty 1 SB08087696
bulb (req 2) MR11, 12 volt, 20 watt, G4 , 2 pin
SB02300882
heat sentry SB02300804
motor SB02310219
blower wheel SB03295076
rubber washer SB03204177
wires SB02301006
bottom duct extension SB08093038
upper duct extension SB08093285
control board SB08080865
light socket SB02320348
transformer SB02300861
cover SB08093286
capacitor w/wires SB06102235
switch assembly white SB06103984
switch assembly black SB06103891
blower assembly SB06002013
charcoal filter SB08087829
mounting template SB04302155
hardware package SB080810974
IP29M REV A (VENMAR) 2008 OBS
JAN 2014
control processor unit SV08069
particulates sensor SV08073
male connector SV13924
female connector SV13923
control interface SV08074
lamp shell, socket and trim assembly SV16569
(42” qty 4, 54” qty 6)
bulb 50 watt 120 volt PAR16 GU10 SV05921
baffle filter 8.95 x 8.61 x 1 SV16967
(includes micromesh filter) 42” qty 2
baffle filter 14.95 x 8.61 x 1 SV16968
(includes micromesh filter) 42” qty 1, 54” qty 3
baffle filter handle w/screws (one handle per pack)
SV07680
filter spring (qty 3 for all sizes) SV05528
micromesh filter 8.84 x 8.50 42” qty 2 SV07694
micromesh filter 14.84 x 8.50 42” qty 1, 54” qty 3
SV07695
grease rail 42” (rail is 36” long) SV16794
grease rail 54” (rail is 48” long) SV16796
inside frame 42” (includes filter springs) SV17448
inside frame 54” (includes filter springs) SV17449
heat sentry SV03435
logo SV05869
internal wire harness SV06631
hardware package SV08068
(steel wood screw 10 x 1.5 qty 10, screws 8 x 3/8 qty
6, washers #10 qty 10)
IP29M REV B (VENMAR) JAN 2013
control processor unit SV08069
particulates sensor SV08073
male connector SV13924
female connector SV13923
control interface SV08074
light socket SV05917