Use and Care Guide

7
7. The Right Back Side Panel will align with the Right Side Panel. Once they are aligned and fit together snug and
tight, use the latches to buckle together. Do the same for the Left Back Side Panel and the Left Side Panel. See
Figure 6
FIG 6 Assembling Back Side Panels and Side Panels
8. Lay the floor heater on the floor panel as seen in FIG 7. Next, insert the long Bench Heater Panel parallel to the
Right Back Side Panel and into the corresponding wood guide slots on the Left Back Side Panel and the Right Side
Panel. Insert the short Bench Heater Panel parallel to the Left Back Side Panel and into the corresponding wood
guide slots on the Left Side Panel and the long Bench Heater Panel. Be sure that both Bench Heater Panels are
inserted correctly into the wood guide slots. Next, connect the heater cords to their corresponding connections in
the Left and Right Back Side Panels. Make sure the connections are snug and tight. See FIG 8
FIG 7 Inserting Floor Heater on floor FIG 8 Installing short Bench Heater Panel
9. Insert the Benches onto the top of the Bench Heater Panels. Make sure to slide them all the way back and up
against the Back Side Panels. Secure the Benches using the provided screws. See FIG 9 & FIG 10