Use and Care Guide

FIG 9 Inserting Benches FIG 10 Securing Benches with screws

10. Align the Front Panel with the Floor Panel, Right Side Panel, and Left Side Panel. Next, latch the Front Panel with

the Left and Right Side Panels respectively. Note: Be cautious with the glass door to avoid breakage. See FIG 11.

FIG 11 Assembling Front Panel

11. Place (flop) cords/wires coming up to through the top of the wall panels to the outside of the wall panels to avoid

damaging the cords/wires during the roof installation. Open the door, lift the Roof Panel up and over the sauna room, and

gently lower it into place resting it on the wall panels. Make sure that all cords/wires are slipped through the

corresponding holes in the Roof Panel. All of the heaters are pre-assembled. Connect the wire connectors and plugs

to their corresponding counterparts on the roof. Make sure the connections are snug and tight. See FIG 12, 13, & 14