Operation Manual

BFB-3000 Set Up and Operations Manual
Document No: D100253 55
9.4.3 Manual move
 See “Manual move”, page 18.
9.4.4 Extruder control
 See “Extruder control”, page 37.
9.4.5 Home tool head
 Push ‘Enter’ to move all axes to their home position.
Make sure the bed is in position before homing the tool head. The bed
contains a sensor necessary for homing. Without the sensor, the
machine will drive the bed frame into the waste disposal stand-offs.
Repeated collisions will damage the machine.
9.4.6 Settings
 Push ‘Enter’ to enter the “Settings” menu:
>
EXTRUDER OFFSETS
LEVEL BED
SET Z HEIGHT
SET BED TYPE
GENERAL SETTINGS
See the following sections for descriptions on each setting.