Operation Manual

2
Key functions:
1) radio on/standby/alarm off
2) clock setup/tuning -
3) set hour/station -/select alarm
4) volume -
5) volume +
6) minute/station +/select alarm
7) set alarm/tuning +
8) sleep button
9) snooze/dimmer control
10) adjust rotation
11) projection on/off
12) flip projection upside-down
13) radio station memory/AMS (Auto-
Memory Search)
14) SET: function setup – date, 12/24-
hour clock, dimmer timer (DT)
15) speaker
1. Set the clock
x In standby mode, press [2] for 3 seconds. The display will flash and show 0:00.
x Set the time by pressing [3] to set the hour and [6] to set the minute.
x Press [2] again to confirm the time. The unit will start to show the passing of every two seconds through
the dot indicator.
2. Set the date
x In standby mode, press [14] on the back. The display will flash and show 0:00.
x Press [14], “Year” will flash. Set the year by pressing [4]/[5], e.g. 2015, 2016, etc.
x After the year has been set, press [14]. “Month” will flash. Set the month by pressing [4]/[5], e.g. 1, 2, up
to 12.
x After the month has been set, press [14]. “Day” will flash. Set the day by pressing [4]/[5], e.g. d01, d02,
up to d031.
x The date will be set and be automatically confirmed if the user does not press any buttons for 15
seconds.
3. Set clock format
x Press [14] and hold until “Year” flashes in the display.
x Press [14] 3 more times.
x 12/24H will flash. Now you can adjust the time format:
x Press [5] for 12H (12-hour format).
x Press [4] for 24H (24-hour format).
x The clock format will be set and be automatically confirmed if the user does not press any buttons for
15 seconds.
4. Set a dimmer timer (DT)
The display backlight can be set to automatically dim at night time, from 23:00 to 06:00, in order to save
energy.
Set as below:
x Press [14] and hold for 15 seconds until “Year” flashes in the display. Press [14] 4 more times.
x “DT” will flash.
x Press [5] to activate the dimmer timer. The display will show “DT”. When the dimmer timer is activated,
the display backlight will be set to automatically dim at night time, from 23:00 to 06:00.
x Press [4] to deactivate the dimmer timer. The display will show “DT”, and the display will not dim at
night.
5. Set alarm
x In standby mode, press [7] for 3 seconds. The unit will go to alarm setup, the “alarm 1” icon in the upper
left corner will flash and the main digit will show 0:00.
x Press [3] to set the alarm hour.
x Press [6] to set the alarm minute.
x Press [7] again to confirm the time of the alarm.