Operation Manual

x With the alarm time set, press [3/6] to select whether the alarm should start the radio or a beep

sound.

x Press [7] again to confirm and proceed to set alarm 2.

x Repeat all the steps above exactly as when setting alarm 1.

x Press [7] again to confirm the settings for alarm 2.

x Disable alarm function:

x Press and hold [7] for 3 seconds, then press [7] once more.

The display will flash “Alarm 1” or “Alarm 2”. Press [3/ 6] to turn off

or and press [7] again to

confirm.

x Output format as below:

Outp

ut LCD display

Beep sound Display shows bell symbol

Radio output Display shows radio symbol

Disabled

All the bell , radio and alarm symbols are gone

If no ke

y is pressed for 15 seconds, the system will go back to normal mode

6. Use the snooze function

When the alarm is ringing, press [9] “SNOOZE/Dimmer”. The display will flash “SNOOZE”. The alarm will

stop, but ring again every 9 minutes. Press [1] to completely turn off the alarm.

7. Listen to FM radio

x For radio mode, press [1]. The display will show FM and the current frequency in digits, e.g. FM92.6

MHz.