user manual

• ALWAYS allow for splitter length when turning

corners, parking, crossing intersections, and in all

other driving situations.

• ALWAYS use caution when backing up splitter. It is

easy to jack-knife the splitter when backing up.

• NEVER allow anyone to ride on the splitter during

towing.

• NEVER transport cargo or logs on splitter during

towing.

• ALWAYS disconnect the splitter from the towing

vehicle before operation.

6 MAINTENANCE SAFETY

Ensure the following safety precautions are observed when

maintenance is performed on the splitter.

• Check for worn or damaged parts before each use.

Replace any worn or damaged parts immediately.

NEVER operate with worn or damaged parts.

• ALWAYS perform maintenance procedures according

to manufacturer’s requirements. NEVER skip or short

change maintenance procedures.

• ALWAYS keep all mechanisms, nuts, bolts, etc.

properly adjusted and lubricated according to the

manufacturer’s specifications.

• ALWAYS shut engine off while repairing or adjusting

the splitter except as directed by the manufacturer.

• Clean debris from splitter and engine regularly. This

must be done with the engine off.

• NEVER alter the splitter in any way. DO NOT add to

the width or height of the wedge. DO NOT readjust

pressure valves from original manufacturer’s

specifications.

• NEVER run the engine at excessive speeds. DO NOT

readjust from manufacturer’s preset specifications.

• NEVER service or repair the splitter without first

removing the spark plug wire.