user manual

• Use only manufacturer approved parts. Parts must

comply with strict manufacturer specifications. Only

parts purchased from the manufacturer can be

guaranteed to comply with these specifications.

7 HYDRAULIC SAFETY

Ensure the following safety precautions are observed when any

hydraulic system maintenance is being performed on the

splitter.

WARNING

Hydraulic system under high pressure. Escaping fluid

can have enough force to penetrate skin causing serious

personal injury, even death.

• NEVER check for hydraulic system leaks with hands.

Leaks can be detected by passing cardboard or wood

over the suspected area and checking for discoloration

or fluid on the material used.

• If injured by escaping fluid, consult a physician

immediately. Serious infection or reaction can develop

if proper medical treatment is not administered

immediately.

• The hydraulic system of the splitter requires careful

inspection. Be sure to replace frayed, kinked, cracked,

or otherwise damaged hydraulic components to avert

total hydraulic system failure.

• Before loosening or removing any hydraulic fitting or

line, relieve all pressure by shutting off the engine and

moving the control handle back and forth several

times.

• NEVER remove the hydraulic reservoir while the

splitter is running. Hot oil under pressure could result

in serious injury.

• NEVER adjust the pressure relief valve. The pressure

relief valve on the splitter is preset at the factory. Only

a qualified service technician should perform this

adjustment.