user manual

8 DAMAGED EQUIPMENT POLICY

Safety Statement

At bil-jax, we are dedicated to the safety of all users of our

products. Therefore, all bil-jax log splitters are designed,

manufactured and tested to comply with current applicable

Federal OSHA and ANSI codes and regulations.

Damage Policy

There may be occasions when a bil-jax log splitter is involved

in an incident that results in structural damage to the splitter.

This can seriously compromise the ability of the splitter to

perform in a safe manner. Therefore, whenever a bil-jax log

splitter is damaged structurally or when there is the possibility

of structural damage (this damage may be internal and is not

always visible to the naked eye), call the bil-jax Service

Department at 419.445.9675. The bil-jax Service Department

will decide if the splitter is required to be returned to our

facility at 125 Taylor Parkway, Archbold, Ohio, for

reconditioning or can be repaired by a qualified repair shop.

Damage Repair Notice

There may be occasions when a bil-jax log splitter is involved

in an accident resulting in non-structural damage. When this

occurs and repairs are made by the owner or area distributor,

please notify bil-jax of these non-maintenance repairs and

request a repair form to be filled out and returned to bil-jax.