user manual

FUNCTION
INTERRUPT
VALVE
3/8-16
LOCKING NUT
3/8-16
NUT
HANDLE
KNOB
COTTER PIN
LINK
SHORT
CLEVIS PIN
Figure 3-3. Function Interrupt Control Assembly
Wedge Control Hardware Assembly
1. Slide the ball handle through the control panel so the
slot in the end of the ball handle rests against a pin in
back of the Wedge Control valve actuator. Refer to
Figure 3-4.
2. Align the front hole on the ball handle with the hole in
the actuator and secure with the long clevis pin and
cotter pin provided in the hardware kit. Move ball
handle up and down to test Wedge Control operation.
ACTUATOR
BALL
HANDLE
LONG
CLEVIS
PIN
WEDGE
CONTROL
VALV E
COTTER
PIN
Figure 3-4. Wedge Control Assembly
15