user manual

3 OPERATING PROCEDURE
Perform the following procedures to operate the Lumber-Jax
log splitter.
1. Read and follow all safety precautions contained in
Section 1 of this manual.
2. Position the splitter on a firm and level surface at the
work area. Block the wheels to prevent movement of
the splitter. Unhitch the splitter from the tow vehicle.
3. Ensure that all personal protective equipment such as
goggles, hearing protection, and safety shoes are being
worn.
4. Remove the lock pin from the splitter I-beam hold
down. Refer to Figure 3-5.
I-BEAM
HOLD
DOWN
LOCK PIN
Figure 3-5. I-Beam Lock Pin
WARNING
The splitter is designed to operate with the I-beam in the
vertical position only. Operating the splitter with the
I-beam in any other position may cause serious personal
injury or damage to the splitter.
5. Ensuring the I-beam path is clear, lift the I-beam into
the vertical position. Do not split logs with the I-beam
in any other position.
16