User’s Guide Digital Video Baby Monitor Models: MBP854HD, MBP854HD-2, MBP854HD-3, MBP854HD-4 The features described in this User’s Guide are subject to modifications without prior notice.
Welcome... to your new Motorola Video Baby Monitor! Thank you for purchasing Motorola Video Baby Monitor. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their playroom. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of the Parent Unit RESET 20 21 10 11 12 14 15 18 8 6 9 7 2 4 16 3 5 17 13 1 19 1. 2. 3. 4. 5. 6. 7. 8.
Parent unit menu icons (cont’d) Volume Level Control (8 Levels) Zoom Level Control (1X, 2X) Brightness Level Control (8 Levels) Lullaby Control (5 Song Selections) Alarm Setting (6h, 4h, 2h, Off ) Temperature Reading (HH ºC / ºF or LL ºC / ºF) Icon & readings turn RED > 29ºC / 84ºF, and reading display HH ºC / ºF > 36ºC / 97 ºF) Icon & readings turn RED < 14ºC / 57ºF, and reading display LL ºC / ºF < 1ºC / 34 ºF) Cam Control (scan, view, add, delete) Screen viewing mode control (Single Screen, 4-split Scree
1. 2. Safety Instructions ..................................................................................... 6 Getting Started.......................................................................................... 8 2.1 2.2 2.3 2.4 3. Using the Baby Monitor........................................................................... 11 3.1 3.2 3.3 3.4 3.5 3.6 4. Setting up................................................................................................... 11 Pan and Tilt ............
1. Safety Instructions WARNING: STRANGULATION HAZARD - Keep the unit and adapter cord more than 3 feet from the crib and out of the baby's reach. NEVER place camera or cords within the crib. Secure the cords more than 3 feet away from the baby's reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided.
ENGLISH CAMERA SET UP & USE: ● Determine a location for the Baby Unit that will provide the best view of your baby in his/her crib. ● Place the BABY UNIT on a flat surface, such as a dresser, bureau, or shelf or mount the Unit to a wall securely using the keyhole slots under the stand. ● NEVER place the Baby Unit or cords within the crib. ● Do not place the Baby Unit or cords in the crib or within reach of the baby (the unit and cords should be more than 3 feet away).
• Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack. • Only insert a battery pack of the same type. • Do not touch the plug contacts with sharp or metal objects. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to their instructions.
2.1 ENGLISH 2. Getting Started Baby Unit Power Supply Power adapter plug Switch to turn ON the camera 1. ON OFF Connect the small plug of the power adapter to the baby unit (camera) and the other end to the electrical outlet. NOTE Only use the enclosed power adapter (5V DC / 1500mA). 2. 3. Slide the ON/OFF switch to the ON position. The power LED will light up in green. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off.
2.3 Parent Unit Power Supply IMPORTANT Installing the rechargeable battery pack and charging it fully before use is recommended. This will allow the unit to operate on battery in the event of a power failure. 1. 2. 3. 4. 5. Connect the small plug of the power adapter to the parent unit and the other end to the electrical outlet. Only use the enclosed power adapter (5V DC / 1500mA) with the slightly smaller DC plug. Press and hold the P POWER ON/OFF button for 1 second to turn ON the parent unit.
During power ON, when adapter is plugged in, the battery icon on screen's top right corner will show that the battery is charging. The Blue LED at the top left corner light up indicates adapter is plugged in. 2.5 Registration (Pairing) The Baby monitor is pre-registered to your Parent Unit. You do not need to register it again unless the Baby Unit loses its link with the Parent Unit. To re-register your Baby Unit, or register a new Baby Unit, follow the procedure below: 1.
3. Using the Baby Monitor 3.1 Setting up • Place the baby unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. • Adjust the baby unit's head angle by rotating the camera up, down, left and right until you are satisfied with the image in the parent unit.
Temperature Display (HH °C / °F or LL °C / °F) Using the Baby Monitor 13 ENGLISH 3.6 The temperature reading from the temperature sensor at the back of the Baby Unit will be displayed at the top of the LCD screen. The readings will turn RED if the temperature goes above 29°C / 84°F or below 14°C / 57°F. The reading will change to HH °C / °F if the temperature goes above 36°C / 97°F. The reading will change to LL °C / °F if the temperature goes below 1°C / 34°F.
4. Parent Unit Menu Options 4.1 1. 2. 3. 4.2 1. 2. 3. 4.3 1. 2. 3. 4. 4.4 1. 2. 3. 4.5 1. 2. 3. 4. 14 Volume Press the M button and the menu bar will pop up. Press the < LEFT button or > button until is highlighted. Press the + UP button or - DOWN button to select the desired volume level from level 0 ~ 8. (The default volume level setting is level 4.) Brightness Press the M button and the menu bar will pop up. Press the < LEFT button or > button until is highlighted.
Camera Control 4.6.1 1. 2. 3. 4. 5. Add (pair) a camera Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted, and the del/add/view/scan menu will pop up. Press the + UP button or - DOWN button to select add, and press the OK button to confirm. cam 1 / cam 2 / cam 3 / cam 4 will pop up, press the + UP button or - DOWN button to select the desired CAM, and press the OK button to start searching for a camera unit.
4.6.4 1. 2. 3. 4. Delete a camera Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted, and the del/add/view/scan menu will pop up. Press the + UP button or - DOWN button to select del, and press the OK button to confirm. cam 1 / cam 2 / cam 3 / cam 4 will pop up, press the + UP button or - DOWN button to select the desired CAM, and press the OK button to delete that registration.
ENGLISH 5. Disposal of The Device (environment) At the end of the product lifecycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be reused if you take them to a recycling point.
6. Cleaning Clean the Baby Monitor with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the product with thinners or other solvents and chemicals –- this may cause permanent damage to the product which is not covered by the warranty. • Keep your Baby Monitor away from hot, humid areas or strong sunlight, and don't let it get wet.
ENGLISH 7. Help Display No display • Try recharging or replacing the battery pack. • Reset the units. Disconnect the battery pack of the parent unit and unplug both the units' electrical power, then plug them back in. • Is the unit turned on? Press and hold the ON/OFF button P on the parent unit to turn it ON. • Is the correct camera selected? Change the camera number, if necessary. • Is the video display turned on? Press the VIDEO ON/OFF button V to turn it on.
Interference Noise interference on your parent unit • Your baby and parent units may be too close. Move them farther apart. • Make sure there is at least 3 to 6 feet between the 2 units to avoid audio feedback. • lf the baby unit is too far away it may be out of range, so move the baby unit closer to the parent unit. • Make sure the baby and parent units are not near other electrical equipment, such as a television, computer or cordless/mobile telephone. • Use of other 2.
ENGLISH 8. General Information lf your product is not working properly.... 1. Read this User's Guide or the Quick Start Guide. 2. Contact Customer Service: US and Canada 1-888-331-3383 Email: support@monitormonitors.com To order a replacement battery pack, contact customer service. Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE").
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
Length of Coverage One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. Consumer Products and Accessories The balance of the original warranty or that are Repaired or Replaced for Ninety (90) days from the date returned to the consumer, whichever is longer. Exclusions Normal Wear and Tear.
Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than MOTOROLA, BINATONE or its authorized service centres, are excluded from coverage. Altered Products.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
WARNING Changes or modifications, to this equipment not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The socket-outlet shall be installed near the equipment and shall be easily accessible. The Unit shall be installed and used such that parts of the user’s body other than the hands are maintained at a distance of approximately 8 inches (20 cm) or more.
ENGLISH Technical Specifications Baby unit (Model: FOCUS85) Frequency 2.4 GHz to 2.48 GHz Image sensor color CMOS 1M Pixels Lens f 2.5mm, F 2.8 IR LED 8 pcs Power Adapter: Ten Pao International Ltd. S009GU0500150 Input: 100-240Vac, 50/60Hz, 300mA; Output: 5.0Vdc, 1500mA WARNING Use only with supplied power supply.
Parent unit (Model: MBP854HDPU) Frequency 2.4 GHz to 2.48 GHz Display 4.3" diagonal TFT LCD Display colors 16.7M color LCD Brightness control 8 steps Volume control 8 steps Powe Adapter Ten Pao International Ltd. S009GU0500150 Input: 100-240Vac, 50/60Hz, 300mA; Output: 5.0Vdc, 1500mA WARNING Use only with provided power supply. Battery Motorola, BF6X 3.7V, 1880mAh Lithium-Ion Polymere, rechargeable battery pack WARNING Do not use non-rechargeable batteries for the Parent Unit.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2014 Motorola Mobility LLC. All rights reserved. Version 2.
