Operation Manual

Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.
12
Dial the telephone number.
If you make a mistake you can correct it by using the
DEL
button to delete digits and then adding the right ones.
Lift the Handset or press the SPEAKERPHONE
button on the Base unit to dial out the number.
3
4
Telephone operation continue...
During a call;
Adjust the volume of the speakerphone to your
comfortable volume level using the
SPEAKERPHONE
volume switch located at the right side of the Base unit.
To adjust the
speakerphone
volume
To switch
between the
Handset and the
Speakerphone
Replace the Handset on the Base unit cradle or
press the SPEAKERPHONE button on the Base
unit.
Ö
The SPEAKERPHONE light indicator will
turn OFF.
To end a call
During a phone conversation through the Handset,
press the SPEAKERPHONE button to speak hands-free.
The Speakerphone light will turn on, but conversation
remains through the Handset until the Handset is
replaced on the Base unit cradle.
During a call, you can mute the microphone
or the mouthpiece so that the person on the
other end cannot hear you.
1 Press MUTE button once.
Ö
While the microphone is muted,
MUTEMUTE
MUTEMUTE
MUTE will
be shown on the lower right corner of the display.
2 Press MUTE button again to get back to the
call.
To mute the
mouthpiece or
microphone
While in speakerphone mode, lift the Handset to
enable a private conversation.
When the phone rings;
Lift the handset or press the SPEAKERPHONE
button on the Base unit.
Ö
The display shows the duration of the call in
minutes and seconds.
To answer a
call
6. One Touch Memory
Store (M1,
M2,M3)
Memory
In standby mode, press the MUTE/STO button
Key in the telephone number you wish to store,
up to a maximum of 24 digits.
1