Operation Manual

Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.
22
Answering Machine System continue...
You can record a memo directly into the
machine.
The length of the memo message
on the MESSAGE LENGTH
setting, see page 9.
The memo message will be played back
together with any messages from callers.
With the Handset on hook, press and hold
the MEMO button until you hear a ‘beep’.
Ö The display shows
MEMO RECORDINGMEMO RECORDING
MEMO RECORDINGMEMO RECORDING
MEMO RECORDING and
the message counter starts to count.
2 Start recording your memo. Speak directly
into the Base unit’s Microphone from a
distance of about 15 cms. (6 inches).
3 As soon as you have finished speaking, press
the EXIT/ON-OFF button to stop recording.
Ö Day and time are automatically stamped at
the end of the message.
To record a
memo
1
Press the PLAY/PAUSE button again to restart
message playback, otherwise it will restart
automatically after a 30-second pause.
After playing all new messages, press the PLAY/
PAUSE button again. The system will play all
of its messages/memos.
Playback
1
To pause a message playback, press the PLAY/
PAUSE button again
If you have messages or memos, the display
and the
MESSAGE light flashes.
If you have new messages or memos, the
display shows and it will be shown
alternately with the total messages.
To playback
your
message/s
XXXX
XXXX
XX
MESSAGESMESSAGES
MESSAGESMESSAGES
MESSAGES
XXXX
XXXX
XX
NEWNEW
NEWNEW
NEW
Press the PLAY/PAUSE button. The machine
will play all new messages/memos.
Ö While a message is being played, the display
PLAY MESSAGEPLAY MESSAGE
PLAY MESSAGEPLAY MESSAGE
PLAY MESSAGE
PLAY MEMOPLAY MEMO
PLAY MEMOPLAY MEMO
PLAY MEMO
Ö If there are no messages/memos present, you
will hear, “You have no messages.”
for recorded memos.
2
3
4
recording depends
and Pause
shows the Caller Display information (if
subscribed) or for received messages;
shows the total number of messages