Operation Manual

Binatone Help Line - 0845 345 9677

Calls are charged at Local Call rate.

13. Troubleshooting

The must be serviced by trained engineers. NEVER

attempt any repairs or adjustments yourself - you could make the

problem worse and invalidate the Guarantee.

ALWAYS check  you have followed the steps listed in Section 2 to

first that: install and set up your .

 all connectors are firmly inserted in their sockets.

 mains power is switched on at the socket.

Everyday use

“I cannot make or Make sure you’re using the telephone line cable that

answer calls.” was supplied with your . Other telephone

line cables might not work.

Switch off power at the mains socket, wait for a few seconds

and then switch back on. This may solve

the problem.

“The phone does Make sure you’re using the telephone line cable

not ring”

that was supplied with your . Other

telephone line cables might not work.

Set the ringer volume to High, using the switch at

the back of the unit.

Check that the total REN value of all equipment

connected to your telephone line is not more than

4. Disconnect one or more telephones.

“The phone does Make sure you’re using the telephone line cable

not dial” that was supplied with your . Other

telephone line cables might not work.

“The Caller You need to subscribe to Caller Display service

Display feature

isn’t working.”

details on how to

subscribe.

from

local

The caller may have withheld their number by

dialing 141. Or they may be calling from a network

that does not transmit the Caller Display (for

example, it may be an international call).

your local telephone company. Contact the

telephone lcompany for

Lyris 710