Operation Manual

Binatone Help Line - 0845 345 9677 Calls are charged at Local Call rate.
Setting up continue...
4 Press UP or DOWN button to set the year.
5 Press MENU button to confirm.
Ö The ‘month’ will be blinking.
6 Press UP or DOWN button to set the month.
7 Press MENU button to confirm.
Ö The ‘date’ will be blinking.
8 Press UP or DOWN button to set the date.
9 Press MENU button to confirm.
Ö The ‘hour’ will be blinking.
10 Press UP or DOWN button to set the hour.
11 Press MENU button to confirm.
Ö The ‘minutes’ will be blinking.
12 Press UP or DOWN button to set the minute.
13 Press MENU button to confirm the TIME and
DATE setting.
14 Continue with programming, or press EXIT
button to return to standby mode.
1
Press MENU button.
Ö The display shows
OPTIONS MENUOPTIONS MENU
OPTIONS MENUOPTIONS MENU
OPTIONS MENU .
2
Press UP or DOWN button until the display
shows
SET FLASH TIMESET FLASH TIME
SET FLASH TIMESET FLASH TIME
SET FLASH TIME .
3
Press MENU button to confirm.
SET FLASH
TIME
You may need the Recall function if your phone is
connected to a PBX, or if you use BT Calling Features.
Flash is another name for the R (Recall) button,
4
Press UP or DOWN button to select 100MS
(default), 300MS, 600MS or 1000MS.
When setting the 'hour' it is in 24 hour
Ö
mode only.
and the normal UK requirement is for 100ms, but
some PBX may need a longer time, in which case
you can change the setting from the Options Menu.
8