User`s manual

19
USER’S MANUAL Operating Instructions
Kick Starting the Engine:
The scooter can be kick started by following these steps:
Turn the key to the “on” position with the vehicle on the
rear kick stand. The vehicle can only be kick star
ted
while on the rear kick stand.
Pull the kick start lever out. Standing behind the vehicle, use
your foot to push down quickly on the lever until the engine
turns on. Pause shortly in between kicks to allow the engine
to stop spinning.
Verify the kill switch is in the open
“Run” position.
If the scooter has been sitting for a prolonged period of time,
turning the throttle 2
-3 times will help with cold starts by
injecting extra fuel to aid in starting. During extremely cold
weather, it is sometim
es helpful to slightly open the throttle
while kick starting to further aid in quick starting. Always
allow the engine to warm up for 2
-3 minutes prior to
driving.