User`s manual

20
Operating Instructions USER’S MANUAL
Electric Starting the Engine:
The duration of each electric start attempt should not exceed 5 seconds.
Always wait at least 10 seconds in between starting attempts to prevent
the starter from overheating.
If 3 startup attempts fail consecutively, the
vehicle must be checked.
First, insert the key
into the ignition
and
turn it to
the
position
“
”.
Verify the kill switch is
in the open “run”
position. The engine will
not run unless the kill
switch is in the correct
position. Always check
this prior to starting.
Hold a brake handle. A safety switch built into the handle
will prevent the engine from starting if you
fail to do so.
Finally, press the electric start button with your right
thumb. The engine will start. Remove your thumb from
the button once the engine has started. In cold weather,
or if the scooter has been sitting, pulling slightly on the
throttle wi
ll aid in starting.