User`s manual

32
Service and Maintenance USER’S MANUAL
Service and Maintenance for the Rear Brake
Adjustment of the rear disc brake:
* First, use the support to prop up the
rear wheel of the motorcycle
and then adjust the free travel of the rear brake.
* Apply the rear brake several times
. Each time the brake should
release freely without binding or sticking.
Rotate the rear wheel
assembly to check whether the wheel rotates freely.
**Service Tip
** Sometimes mud and dirt can collect around the rear
brake cable under trans
mission. Always keep the cable and fittings
clean of dirt and debris. Lubricate the cables often to improve service
life.
Use the support to prop up the motorcycle, and adjust the free
travel of the rear
brake between ¼- ½ inch.
When applying the rear brake, ensure the wheel stops spinning within the
recommend free travel. On rear brake cable equipped models, turn the
brake adjustment fitting at the bottom o
f the cable clockwise to tighten the
cable and reduce free travel. If the adjustment is maxed out, please take
your vehicle in to an authorized service center for servicing.