User`s manual

34
Service and Maintenance USER’S MANUAL
Service and Maintenance for Front and Rear Tires
Prior to riding always inspect the tires. Make sure the front and rear tire
are filled to their recommend pressure. Proper tire inflation increases
riding comfort and stability of the driving of vehicle while prolonging the
service life of the tires.
Tire Pressure
Front
wheel
30psi
Rear
wheel
32psi
Removal and Installation of Front Wheel
* With the engine off, place the vehicle on the center kickstand.
*
Remove the nut off the front wheel bolt. Slide the bolt out while
making sure to retain all hardware including wheel spacers, and
speedometer sending unit.
Caution:
* Do not use the front brake with the wheel removed.
* Always retorque the front wheel nut to 80ft.lbs.
* Check fluid level and top off if needed. Verify the wheel spins freely
with no brake drag.
Check the air pressure of the tire and visually inspect the
rubber tire and rim for excessive wear or defects
. If there are
any issues, the tire should be replaced at a local authorized
service center.
Failure to
properly torque
t
he front wheel
nut can lead to
serious injury!