User`s manual

Service and Maintenance USER’S MANUAL

Service and Maintenance for Battery

All Bintelli scooters come standard with a MotoBatt Quadflex Sealed Maintenance

Free AGM Battery.

These high performance batteries offer more cold cranking amps

and higher capacities then standard scooter batteries. In order to main

tain and

prolong the life of your battery, please maintain the battery as follows:

1. Keep terminals clean and free from corrosion.

2. Ensure battery terminals and all connections are tight. Loose wires can lead to a

loss of the electric start.

3. Alwa

ys remove the battery from the scooter and place onto a trickle charger if the

vehicle is not going to be used for more then a 2 week period. Failure to maintain

the charge of the battery can lead to poor service life.

4. MotoBatt batteries are sealed unit

s, never remove any part of the battery to

replace fluids.

Ensure the battery terminals are clean and tightened

properly. Any signs of corrosion need to be cleaned

promptly to prevent damage to the battery and

cables.

When checking the voltage of the battery, a reading of less

than 12volts indicates the need for the battery to be charged.

You can also p

lace the battery under a load test to verify the

strength.

Weak batteries will be unable to start the

scooter. Place the battery on a 12volt

trickle charger to maintain and prolong the

service life.