User`s manual

37
USER’S MANUAL Service and Maintenance
Service and Maintenance for the Fuse
The fuse is connected in series to the battery. If there is a sudden power
surge or issue within the electrical system, the fuse will automatically break to
protect the battery and
other electrical components. Bintelli recommends
using the OEM 15amp fuse.
Caution
*
A blown fuse can signify a problem with the battery, charging system,
or wiring harness. Always have your vehicle inspected at an
authorized Bintelli service center in the event of a blown fuse.
Service and Maintenance for the Horn
Over time the horn may need to be adjusted due to road vibrations. By
removing the front panel you can gain access to the horn and the
adjustment screw.
If the entire electrical system of the scooter is not functioning,
check the fuse first. A blown fuse will cause all electrical
components including the electrical start to stop functioning.
If the horn sound becomes weak or no longer works, remove the
front
panel. Use a multi-meter to measure the output voltage of
the horn circuit. If the
horn is receiving 12volts with the ignition
turned on
, use the horn regulating screw to adjust the sound
volume of the
horn to the desired level.