User Manual

18 19
MAINTENANCE
Maintenance Of Product Surface
and Ceramics
1. Wipe dust or stains with a soft wet cloth.
2. A wet soft brush, cloth, or sponge may be
used to clean the ceramic area. Do not use
abrasive cleaning solutions, such as alcohol,
bleach, paint thinner, cresol, benzene,
gasoline, etc.
Maintenance Of The Nozzle
1. Press the “Nozzle Clean” button on the
remote control without occupying the seat.
The nozzle will extend. Proceed to clean
with a soft toothbrush. Do not forcefully
hold the nozzle.
Warning
Do not spray water or detergents on the toilet,
remote control or the power cord. Doing so may
cause electric shock or fire.
Maintenance During Winter Season
During winter season, the water inside
may freeze after long periods of storage and
non-usage. Please take measures to prevent.
Note
Before connecting the product to the water
supply and electrical outlet, allow it to defrost
for 30 minutes in a warm indoor environment.
In cases of extreme cold/freezing/nozzle stuck
in place, wrap the water input line with a warm
towel. Never pour hot water or use a hot dryer
directly on the toilet.
Regular Maintenance Is Required To Ensure Normal Use.
Note: Cut off the power and water supply before maintenance. Direct water
wash to the entire product is prohibited.