BB800 Owner Manual

lifestyle Upgrade
15
Installation Manual and Operating Instructions
INSTALLATION
15
Water Supply to Tank Assembly.
Installation Manual and Operating Instructions
※Check for any water leaks.
catch plate
Place the plate and guides over each mounting hole.
Insert the mounting bolts through the plate and
mounting holes.
5
1. Slide this product onto the catch plate
centering the unit with the guide arrows on the Base.
2. You will hear a click once this product is securely
mounted to the catch plate.
3. This product will feel a little loose on the toilet bowl.
Adjust the fit from front to back and side to side for balance.
4. Tighten the nuts on both bolts securely.
7
1. Connect the flexible tube from side of
T-Valve to this product.
2. Open water valve.
3. Check for leaks.
4. If there are no leaks and the surrounding
area is clean and dry, connect the power
cord to a ground protected power outlet.
※Customers should use the new hose set provided with
the product. Do not use used set again.
8
Slide cone packing and washers onto the bolts
then fasten to securely mount bidet seat to toilet.
6
Installation Catch Plate.
Bolt and Nut Assembly.
Assembly. Water Supply Tube Assembly.
Cone Packing
Nut
Bolt case
Bolt
180205_BB-800,1000 USER's MANUAL_주소수정 및 타사필터 금지 문구 추가 必.indd 15 2018-02-08 오전 11:21:05